SubMiner/docs-site/anki-integration.md

Anki integration

SubMiner talks to Anki through the AnkiConnect add-on. It fills new cards with the sentence, an audio clip, and a screenshot, and can create sentence cards and merge duplicate words. It is built for the Lapis, Kiku, and Senren note types, but works with any note type once you map its fields.

For the day-to-day flow, see Mining workflow. Every key on this page, with its default, is listed in the AnkiConnect config reference.

Prerequisites

1. Install Anki.
2. Install AnkiConnect (add-on code 2055492159).
3. Install FFmpeg and make sure it is on your PATH. SubMiner uses it for audio and images.
4. Keep Anki running while you mine.

If you changed AnkiConnect's port, set ankiConnect.url to match.

How cards get filled

When Yomitan adds a note, SubMiner fills the sentence, audio, image, and MiscInfo fields. It finds new notes in one of two ways:

• Proxy (default). SubMiner runs a local AnkiConnect-compatible server. Yomitan sends notes through it, and SubMiner fills each one right after Anki accepts it.
• Polling. With ankiConnect.proxy.enabled set to false, SubMiner asks AnkiConnect for recently added notes every ankiConnect.pollingRate milliseconds.

Set ankiConnect.behavior.autoUpdateNewCards to false to stop automatic filling and update cards by hand with Ctrl/Cmd+V instead.

ankiConnect.deck limits enrichment and duplicate checks to one deck. If it is empty, SubMiner uses Yomitan's mining deck when it can read it, and otherwise searches all decks.

Proxy mode setup (Yomitan / texthooker)

"ankiConnect": {
  "url": "http://127.0.0.1:8765",
  "proxy": {
    "enabled": true,
    "host": "127.0.0.1",
    "port": 8766,
    "upstreamUrl": "http://127.0.0.1:8765"
  }
}

Clients must send notes to the proxy (http://127.0.0.1:8766 here), not to AnkiConnect directly.

• Bundled Yomitan. SubMiner sets the active Yomitan profile's Anki server for you. With the proxy on, it always points the profile at the proxy. With the proxy off, it sets ankiConnect.url, but only if the profile's server is blank or the stock http://127.0.0.1:8765.
• Browser Yomitan or other clients. Set the Anki server to the proxy URL yourself. To leave your main profile alone, create a separate Yomitan profile for SubMiner, set its Anki server (Settings, Anki) to the proxy URL, and make it active while you mine.

Proxy troubleshooting

If cards are not getting filled:

1. Check that the proxy is listening while SubMiner runs:

   ss -ltnp | grep 8766
   

2. Check that requests pass through to Anki:

   curl -sS http://127.0.0.1:8766 \
     -H 'content-type: application/json' \
     -d '{"action":"version","version":2}'
   

3. Read the app log (app-YYYY-MM-DD.log) in the logs folder. See Troubleshooting for where logs live.

Field mapping

ankiConnect.fields maps SubMiner's data to fields on your note type.

Key	Receives
fields.word	The mined word
fields.audio	Sentence audio cut from the video
fields.wordAudio	Read only: Yomitan's word audio, used to time animated images (see below)
fields.image	Screenshot or animated clip
fields.sentence	Subtitle text
fields.miscInfo	Text from ankiConnect.metadata.pattern

"ankiConnect": {
  "fields": {
    "audio": "SentenceAudio",
    "sentence": "Sentence"
  }
}

Field names are matched case-insensitively. A mapped field that is missing from the note type is skipped.

fields.audio gets sentence audio, not word audio. Yomitan writes its own dictionary audio into your note, so point fields.audio at a separate field such as SentenceAudio. The default, ExpressionAudio, is the field many note types use for Yomitan's word audio, so leaving it would overwrite that audio.

ankiConnect.tags adds tags to every mined or updated card. Set it to [] to add none.

ankiConnect.metadata.pattern builds the MiscInfo text. Tokens: %f file name, %F file name with extension, %t timestamp, %T timestamp with milliseconds, <br> line break.

Media

Key	What it does
media.generateAudio	Cut sentence audio (MP3) from the subtitle's start and end time
media.audioPadding	Seconds added before and after the clip
media.fallbackDuration	Clip length when the subtitle has no timing
media.maxMediaDuration	Longest allowed clip, in seconds (0 removes the cap)
media.normalizeAudio	Normalize clip loudness
media.mirrorMpvVolume	Scale the clip by mpv's current volume, so quiet playback gives quiet clips
media.generateImage	Capture an image
media.imageType	static for one frame, avif for an animated clip of the line
media.imageFormat	Static format: jpg, png, or webp
media.imageQuality	Static image quality
media.imageMaxWidth / Height	Static size limit (0 keeps source size)
media.animatedFps	Animated clip frame rate
media.animatedMaxWidth / Height	Animated size limit (0 keeps aspect ratio)
media.animatedCrf	Animated quality, 0 to 63, lower is better
media.syncAnimatedImageToWordAudio	Hold the first frame for the length of the word audio in fields.wordAudio, so the motion starts with the sentence audio
media.reviewTiming	Pause and let you adjust the clip before media is made (see below)

Animated AVIF needs an FFmpeg build with an AV1 encoder (libaom-av1, libsvtav1, or librav1e).

Media settings apply to the next card without a restart.

Review media timing

With media.reviewTiming on, SubMiner pauses before making media for word, sentence, and audio cards and opens a review dialog. You can also toggle it for the current session with Review Media Timing in the runtime options palette (Ctrl/Cmd+Shift+O). Clipboard updates and stats-dashboard mining skip the review.

The dialog shows the clip over a speech waveform. When the waveform loads, an untouched clip end moves back to just after the last speech in the line. The Line end rail still marks the subtitle's own end.

Action	How
Trim	Drag either edge, or click the waveform to move the nearer edge there
Nudge an edge	Arrow keys on a focused edge (100 ms, Shift for 500 ms)
Slide the clip	Drag the middle
Show more timeline	Earlier / Later
Pick the screenshot	Screenshot slider or Frame buttons (static images only)
Add previous / next line	P / N (Shift+P / Shift+N removes)
Preview	Space
Confirm	Enter
Cancel	Escape

The confirmed range is used as is, with no extra padding. Added lines go into the sentence field. Reset restores the original timing and removes added lines.

When you cancel, you can go back to editing, keep the original timing, create the card without media, or discard it. Discard deletes the Yomitan note or audio card, and skips creation for a sentence card.

Update behavior

Key	What it does
behavior.overwriteAudio	Replace existing audio instead of adding to it
behavior.overwriteImage	Replace the existing image instead of adding to it
behavior.mediaInsertMode	append or prepend new media when not overwriting
behavior.autoUpdateNewCards	Fill new Yomitan notes automatically
behavior.highlightWord	Bold the mined word in the sentence field
behavior.notificationType	overlay, system, both, or none

Manual clipboard updates (Ctrl/Cmd+V) always replace the sentence audio, whatever overwriteAudio says.

Sentence cards (Lapis)

Ctrl/Cmd+S creates a standalone sentence card from the current line, and Ctrl/Cmd+Shift+S then a digit combines several lines. The card uses the note type named in ankiConnect.isLapis.sentenceCardModel, which must exist in Anki. If it is empty, no card is created.

"ankiConnect": {
  "isLapis": {
    "enabled": true,
    "sentenceCardModel": "Lapis"
  }
}

Sentence cards and audio cards (Ctrl/Cmd+Shift+A) always write to the Sentence and SentenceAudio fields. Normal word cards keep using your ankiConnect.fields mapping.

Word card type (Kiku/Lapis)

When isKiku or isLapis is enabled, SubMiner sets a card-type flag on word cards it fills. Choose the flag with ankiConnect.lapisKiku.wordCardKind:

Value	Flag
word-and-sentence	IsWordAndSentenceCard
click	IsClickCard
sentence	IsSentenceCard
audio	IsAudioCard
none	Leaves flags alone

The other card-type flags are cleared. Sentence cards and audio cards keep their own flag.

Field grouping (Kiku/Senren)

When you mine a word that already has a card, SubMiner can merge the new card into the old one. The sentence, audio, image, and MiscInfo from both cards are kept as grouped entries, and the template lets you switch between them. This works with Kiku and Senren (which calls it scene switching).

Enable one of them. They write different markup to the same fields, so only one can be on. If both are enabled, Kiku is used and SubMiner logs a config warning.

"ankiConnect": {
  "isKiku": {
    "enabled": true,
    "fieldGrouping": "manual",
    "deleteDuplicateInAuto": true
  }
}

For Senren, use the same keys under isSenren.

fieldGrouping	Behavior
disabled	No duplicate check
auto	Merge into the existing card. With deleteDuplicateInAuto, delete the new card
manual	Show both cards, let you choose which to keep and preview the merge

The manual dialog cancels itself after 90 seconds. Identical entries are not deduplicated. Press Ctrl/Cmd+G to run the duplicate check on the last card yourself.

Key	Action
1 / 2	Keep card 1 or card 2
Enter	Confirm
Backspace	Back from the merge preview
Esc	Cancel and leave both cards unchanged

Config validation

Invalid ankiConnect values produce a warning and fall back to the default. Use JSON booleans (true, not "true") and a positive number for pollingRate.