add vim plugin confs

nvim/init.vim

@@ -40,12 +40,10 @@ set nobackup
 set nowritebackup
 set cmdheight=2
 set updatetime=300
+set timeoutlen=400
 " Don't pass messages to |ins-completion-menu|.
 set shortmess+=c
 
-" lsp handled by coc
-let g:ale_disable_lsp = 1
-
 " Install vim-plug if not found
 if empty(glob('~/.vim/autoload/plug.vim'))
   silent !curl -fLo ~/.vim/autoload/plug.vim --create-dirs
@@ -88,6 +86,12 @@ if has('nvim')
   Plug 'nvim-treesitter/nvim-treesitter', {'do': ':TSUpdate'}
   Plug 'TimUntersberger/neogit'
 
+  Plug 'neovim/nvim-lspconfig'
+  Plug 'williamboman/nvim-lsp-installer'
+  Plug 'ray-x/lsp_signature.nvim'
+  Plug 'simrat39/symbols-outline.nvim'
+  Plug 'jose-elias-alvarez/null-ls.nvim'
+
   Plug 'NTBBloodbath/doom-one.nvim'
   Plug 'Mofiqul/dracula.nvim'
   Plug 'projekt0n/github-nvim-theme'
@@ -97,7 +101,7 @@ else
   Plug 'mhinz/vim-startify'
   Plug 'preservim/nerdtree' | Plug 'Xuyuanp/nerdtree-git-plugin'
   Plug 'liuchengxu/vim-which-key', { 'on': ['WhichKey', 'WhichKey!'] }
-  " vim colorschemes
+
   Plug 'joshdick/onedark.vim'
   Plug 'kaicataldo/material.vim', { 'branch': 'main'  }
   Plug 'morhetz/gruvbox'
@@ -107,34 +111,63 @@ endif
 call plug#end()
 
 if has('nvim')
-  source ~/.config/nvim/plugins/bufferline.lua
-  " source ~/.config/nvim/plugins/marks.lua
-  source ~/.config/nvim/plugins/whichkey.lua
-  source ~/.config/nvim/plugins/dashboard-nvim.lua
-  source ~/.config/nvim/plugins/nvimtree.lua
-  source ~/.config/nvim/plugins/treesitter.lua
-  source ~/.config/nvim/plugins/neogit.lua
+  source ~/.config/nvim/plugin-confs/bufferline.lua
+  " source ~/.config/nvim/plugin-confs/marks.lua
+  source ~/.config/nvim/plugin-confs/whichkey.lua
+  source ~/.config/nvim/plugin-confs/dashboard-nvim.lua
+  source ~/.config/nvim/plugin-confs/dashboard-art.vim
+  source ~/.config/nvim/plugin-confs/nvimtree.lua
+  source ~/.config/nvim/plugin-confs/treesitter.lua
+  source ~/.config/nvim/plugin-confs/neogit.lua
 
+  " source ~/.config/nvim/plugin-confs/lspconfig.lua
+  source ~/.config/nvim/plugin-confs/lsp-signature.lua
+  source ~/.config/nvim/symbols-outline.lua
+  " source ~/.config/nvim/null-ls.lua
 
-  source ~/.config/nvim/plugins/doomone.lua
-  " source ~/.config/nvim/plugins/dracula.lua
-  " source ~/.config/nvim/plugins/github-theme.lua
+  source ~/.vim/plugin-confs/fzf.vim
+  source ~/.vim/plugin-confs/vim-closetag.vim
+  source ~/.vim/plugin-confs/wakatime.vim
+  source ~/.vim/plugin-confs/lightline.vim
+  source ~/.vim/plugin-confs/floaterm.vim
+
+  source ~/.vim/plugin-confs/ale.vim
+  source ~/.vim/plugin-confs/coc.vim
+
+  source ~/.config/nvim/plugin-confs/doomone.lua
+  source ~/.config/nvim/plugin-confs/dracula.lua
+  source ~/.config/nvim/plugin-confs/github-theme.lua
 
   " makes fzf match colorscheme (I think)
   augroup fzf_preview
 	autocmd!
 	autocmd User fzf_preview#rpc#initialized call s:fzf_preview_settings() " fzf_preview#remote#initialized or fzf_preview#coc#initialized
   augroup END
-
   function! s:fzf_preview_settings() abort
 	let g:fzf_preview_command = 'COLORTERM=truecolor ' . g:fzf_preview_command
 	let g:fzf_preview_grep_preview_cmd = 'COLORTERM=truecolor ' . g:fzf_preview_grep_preview_cmd
   endfunction
   " make terminal not have line numbers
   autocmd TermOpen * setlocal nonumber norelativenumber
+
 else
-  source ~/.vim/plugins/nerdtree.vim
-  source ~/.vim/plugins/whichkey.vim
+  source ~/.vim/plugin-confs/nerdtree.vim
+  source ~/.vim/plugin-confs/whichkey.vim
+  source ~/.vim/plugin-confs/ale.vim
+  source ~/.vim/plugin-confs/fzf.vim
+  source ~/.vim/plugin-confs/vim-closetag.vim
+  source ~/.vim/plugin-confs/wakatime.vim
+  source ~/.vim/plugin-confs/prettier.vim
+  source ~/.vim/plugin-confs/lightline.vim
+  source ~/.vim/plugin-confs/coc.vim
+  source ~/.vim/plugin-confs/floaterm.vim
+  if executable('bash-language-server')
+    au User lsp_setup call lsp#register_server({
+          \ 'name': 'bash-language-server',
+          \ 'cmd': {server_info->[&shell, &shellcmdflag, 'bash-language-server start']},
+          \ 'allowlist': ['sh'],
+          \ })
+  endif
 endif
 
 "------------------------------------------------------------------------------
@@ -152,233 +185,9 @@ autocmd FileType man wincmd L
 if has("autocmd")
   au BufReadPost * if line("'\"") > 0 && line("'\"") <= line("$") | exe "normal! g`\"" | endif
 endif
-
-"------------------------------------------------------------------------------
-"fzf
-"------------------------------------------------------------------------------
-
-" This is the default extra key bindings
-let g:fzf_commands_expect = 'ctrl-enter'
-let g:fzf_buffers_jump = 1
-let g:fzf_tags_command = 'ctags -R'
-" This is the default option:
-"   - Preview window on the right with 50% width
-"   - CTRL-/ will toggle preview window.
-" - Note that this array is passed as arguments to fzf#vim#with_preview function.
-" - To learn more about preview window options, see `--preview-window` section of `man fzf`.
-let g:fzf_preview_window = ['right:50%', 'ctrl-/']
-let g:fzf_layout = { 'window': { 'width': 0.8, 'height': 0.75 } }
-
-let g:fzf_action = {
-  \ 'ctrl-t': 'tab split',
-  \ 'ctrl-x': 'split',
-  \ 'ctrl-v': 'vsplit' }
-
-" An action can be a reference to a function that processes selected lines
-function! s:build_quickfix_list(lines)
-  call setqflist(map(copy(a:lines), '{ "filename": v:val }'))
-  copen
-  cc
-endfunction
-
-let g:fzf_action = {
-  \ 'ctrl-q': function('s:build_quickfix_list'),
-  \ 'ctrl-t': 'tab split',
-  \ 'ctrl-x': 'split',
-  \ 'ctrl-v': 'vsplit',
-  \ 'ctrl-n': 'next',
-  \}
-
-" Customize fzf colors to match your color scheme
-" - fzf#wrap translates this to a set of `--color` options
-let g:fzf_colors =
-\ { 'fg':      ['fg', 'Normal'],
-  \ 'bg':      ['bg', 'Normal'],
-  \ 'hl':      ['fg', 'Comment'],
-  \ 'fg+':     ['fg', 'CursorLine', 'CursorColumn', 'Normal'],
-  \ 'bg+':     ['bg', 'CursorLine', 'CursorColumn'],
-  \ 'hl+':     ['fg', 'Statement'],
-  \ 'info':    ['fg', 'PreProc'],
-  \ 'border':  ['fg', 'Ignore'],
-  \ 'prompt':  ['fg', 'Conditional'],
-  \ 'pointer': ['fg', 'Exception'],
-  \ 'marker':  ['fg', 'Keyword'],
-  \ 'spinner': ['fg', 'Label'],
-  \ 'header':  ['fg', 'Comment'] }
-
-" Enable per-command history
-" - History files will be stored in the specified directory
-" - When set, CTRL-N and CTRL-P will be bound to 'next-history' and
-"   'previous-history' instead of 'down' and 'up'.
-let g:fzf_history_dir = '~/.local/share/fzf-history'
-
-command! -bang -nargs=? -complete=dir Files
-    \ call fzf#vim#files(<q-args>, fzf#vim#with_preview({'options': ['--layout=reverse', '--info=inline']}), <bang>0)
-
-" command! -bang -nargs=? -complete=dir Files
-"   \ call fzf#run(fzf#wrap('files', fzf#vim#with_preview({'dir': <q-args>, 'sink': 'e', 'source': 'rg --files --hidden'}), <bang>0))
-
-command! -bang -nargs=? -complete=dir AllFiles
-  \ call fzf#run(fzf#wrap('allfiles', fzf#vim#with_preview({'dir': <q-args>, 'sink': 'e', 'source': 'rg --files --hidden --no-ignore'}), <bang>0))
-
-
-"------------------------------------------------------------------------------
-"ale
-"------------------------------------------------------------------------------
-
-let g:ale_sh_shellcheck_executable = '/usr/bin/shellcheck'
-let g:ale_sh_shellcheck_options = '-S info -s bash -o all -e 2250'
-let g:ale_sh_shfmt_options = '-i=4 -ci -sr'
-let g:ale_fix_on_save = 1
-" let g:ale_set_quickfix = 1
-let g:ale_virtualenv_dir_names = ['env']
-
-let g:ale_linter_aliases = {'javascriptreact': ['css', 'javascript'], 'typescriptreact': ['css', 'javascript']}
-let g:ale_linters = {'javascriptreact': ['css', 'javascript'], 'typescriptreact': ['css', 'javascript'], 'python': ['pylint','pycodestyle', 'pydocstyle'], 'sh': ['shellcheck']}
-" Fix files with prettier, and then ESLint.
-let g:ale_fixers = {'*': ['remove_trailing_lines', 'trim_whitespace'], 'javascript': ['prettier', 'eslint'], 'sh': ['shfmt'], 'typescript': ['eslint'], 'python': ['black']}
-
-"------------------------------------------------------------------------------
-"vim-closetag
-"------------------------------------------------------------------------------
-
-" filenames like *.xml, *.html, *.xhtml, ...
-" These are the file extensions where this plugin is enabled.
-let g:closetag_filenames = '*.html,*.xhtml,*.phtml,*.js,*.ts,*.jsx,*.tsx'
-
-" filenames like *.xml, *.xhtml, ...
-" This will make the list of non-closing tags self-closing in the specified files.
-"
-let g:closetag_xhtml_filenames = '*.xhtml,*.jsx,*.tsx,*.js,*.ts'
-
-" filetypes like xml, html, xhtml, ...
-" These are the file types where this plugin is enabled.
-"
-let g:closetag_filetypes = 'html,xhtml,phtml'
-
-" filetypes like xml, xhtml, ...
-" This will make the list of non-closing tags self-closing in the specified files.
-"
-let g:closetag_xhtml_filetypes = 'xhtml,jsx,tsx,js'
-
-" integer value [0|1]
-" This will make the list of non-closing tags case-sensitive (e.g. `<Link>` will be closed while `<link>` won't.)
-"
-let g:closetag_emptyTags_caseSensitive = 1
-
-" Disables auto-close if not in a "valid" region (based on filetype)
-
-let g:closetag_regions = {
-    \ 'typescript.tsx': 'jsxRegion,tsxRegion',
-    \ 'javascript.jsx': 'jsxRegion',
-    \ }
-
-"------------------------------------------------------------------------------
-" WAKATIME
-"------------------------------------------------------------------------------
-
-let g:wakatime_PythonBinary = '/usr/bin/python'  " (Default: 'python')
-let g:wakatime_OverrideCommandPrefix = '/usr/bin/wakatime'  " (Default: '')
-
-"------------------------------------------------------------------------------
-"PRETTIER
-"------------------------------------------------------------------------------
-
-packloadall "enable prettier
-let g:prettier#autoformat = 1
-let g:prettier#autoformat_require_pragma = 0
-let g:prettier#exec_cmd_path = "/usr/bin/prettier"
-
-"------------------------------------------------------------------------------
-" Lightline
-"------------------------------------------------------------------------------
-
-let g:lightline = {}
-" 'one', 'material', 'darcula', 'deus'
-let g:lightline.colorscheme = "deus"
-" let g:lightline.colorscheme = "one"
-" let g:lightline.colorscheme = "darcula"
-let g:lightline.component_function = {
-      \   'fugitive': 'MyFugitive',
-      \   'readonly': 'Readonly',
-      \   'modified': 'Modified',
-      \   'filename': 'Filename',
-      \   'cocstatus': 'coc#status',
-      \}
-
-let g:lightline.component = { 'charhexvalue': '0x%B' }
-let g:lightline.separator = { 'left': "\ue0b0", 'right': "\ue0b2"  }
-let g:lightline.subseparator = { 'left': "\ue0b1", 'right': "\ue0b3"  }
-
-let g:lightline.component_expand = {
-      \  'linter_checking': 'lightline#ale#checking',
-      \  'linter_infos': 'lightline#ale#infos',
-      \  'linter_warnings': 'lightline#ale#warnings',
-      \  'linter_errors': 'lightline#ale#errors',
-      \  'linter_ok': 'lightline#ale#ok',
-      \ }
-
-let g:lightline.component_type = {
-      \     'linter_checking': 'right',
-      \     'linter_infos': 'right',
-      \     'linter_warnings': 'warning',
-      \     'linter_errors': 'error',
-      \     'linter_ok': 'right',
-      \ }
-
-let g:lightline.active = {
-            \   'left': [ [ 'mode', 'paste' ],
-            \             [ 'cocstatus', 'fugitive', 'filename' ] ],
-            \ 'right': [ [ 'linter_checking', 'linter_errors', 'linter_warnings', 'linter_infos', 'linter_ok' ],
-            \            [ 'lineinfo' ],
-	        \            [ 'percent' ],
-	        \            [ 'fileformat', 'fileencoding', 'filetype'] ] }
-
-let g:lightline#ale#indicator_checking = "\uf110 "
-let g:lightline#ale#indicator_infos = "\uf129 "
-let g:lightline#ale#indicator_warnings = "\uf071 "
-let g:lightline#ale#indicator_errors = "\uf05e "
-let g:lightline#ale#indicator_ok = "\uf00c "
-
-" Use autocmd to force lightline update.
-autocmd User CocStatusChange,CocDiagnosticChange call lightline#update()
-function! Modified()
-  if &filetype == "help"
-    return ""
-  elseif &modified
-    return "+"
-  elseif &modifiable
-    return ""
-  else
-    return ""
-  endif
-endfunction
-
-function! Readonly()
-  if &filetype == "help"
-    return ""
-  elseif &readonly
-    return "\ue0a2"
-  else
-    return ""
-  endif
-endfunction
-
-function! MyFugitive()
-    let _ = fugitive#head()
-    return strlen(_) ? "\ue0a0 "._ : ''
-endfunction
-
-function! Filename()
-  return ('' != Readonly() ? Readonly() . ' ' : '') .
-    \ ('' != expand('%:t') ? expand('%:t') : '[No Name]') .
-    \ ('' != Modified() ? ' ' . Modified() : '')
-endfunction
-
 "------------------------------------------------------------------------------
 "COLORSCHEME
 "------------------------------------------------------------------------------
-
 set t_Co=256
 if has('nvim')
     set termguicolors
@@ -400,171 +209,16 @@ else
     let g:gruvbox_improved_warnings = 1
     colorscheme gruvbox
 endif
-
-
-"------------------------------------------------------------------------------
-"""bash language server
-"------------------------------------------------------------------------------
-if executable('bash-language-server')
-  au User lsp_setup call lsp#register_server({
-        \ 'name': 'bash-language-server',
-        \ 'cmd': {server_info->[&shell, &shellcmdflag, 'bash-language-server start']},
-        \ 'allowlist': ['sh'],
-        \ })
-endif
-
-"------------------------------------------------------------------------------
-" NICE COC
-"------------------------------------------------------------------------------
-
-" Always show the signcolumn, otherwise it would shift the text each time
-" diagnostics appear/become resolved.
-if has("nvim-0.5.0") || has("patch-8.1.1564")
-  " Recently vim can merge signcolumn and number column into one
-  set signcolumn=number
-else
-  set signcolumn=yes
-endif
-inoremap <silent><expr> <TAB>
-      \ pumvisible() ? "\<C-n>" :
-      \ <SID>check_back_space() ? "\<TAB>" :
-      \ coc#refresh()
-inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<C-h>"
-function! s:check_back_space() abort
-  let col = col('.') - 1
-  return !col || getline('.')[col - 1]  =~# '\s'
-endfunction
-" Use <c-space> to trigger completion.
-if has('nvim')
-  inoremap <silent><expr> <c-space> coc#refresh()
-else
-  inoremap <silent><expr> <c-@> coc#refresh()
-endif
-" Make <CR> auto-select the first completion item and notify coc.nvim to
-" format on enter, <cr> could be remapped by other vim plugin
-inoremap <silent><expr> <cr> pumvisible() ? coc#_select_confirm()
-                              \: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
-nmap <silent> [g <Plug>(coc-diagnostic-prev)
-nmap <silent> ]g <Plug>(coc-diagnostic-next)
-" GoTo code navigation.
-nmap <silent> gd <Plug>(coc-definition)
-nmap <silent> gy <Plug>(coc-type-definition)
-nmap <silent> gi <Plug>(coc-implementation)
-nmap <silent> gr <Plug>(coc-references)
-" Use K to show documentation in preview window.
-nnoremap <silent> K :call <SID>show_documentation()<CR>
-function! s:show_documentation()
-  if (index(['vim','help'], &filetype) >= 0)
-    execute 'h '.expand('<cword>')
-  elseif (coc#rpc#ready())
-    call CocActionAsync('doHover')
-  else
-    execute '!' . &keywordprg . " " . expand('<cword>')
-  endif
-endfunction
-" Highlight the symbol and its references when holding the cursor.
-autocmd CursorHold * silent call CocActionAsync('highlight')
-" Symbol renaming.
-nmap <leader>rn <Plug>(coc-rename)
-" Formatting selected code.
-xmap <leader>f  <Plug>(coc-format-selected)
-nmap <leader>f  <Plug>(coc-format-selected)
-augroup mygroup
-  autocmd!
-  " Setup formatexpr specified filetype(s).
-  autocmd FileType typescript,json,python,py,sh,bash setl formatexpr=CocAction('formatSelected')
-  " Update signature help on jump placeholder.
-  autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp')
-augroup end
-" Applying codeAction to the selected region.
-" Example: `<leader>aap` for current paragraph
-xmap <leader>a  <Plug>(coc-codeaction-selected)
-nmap <leader>a  <Plug>(coc-codeaction-selected)
-" Remap keys for applying codeAction to the current buffer.
-nmap <leader>ac  <Plug>(coc-codeaction)
-" Apply AutoFix to problem on the current line.
-nmap <leader>qf  <Plug>(coc-fix-current)
-" Run the Code Lens action on the current line.
-nmap <leader>cl  <Plug>(coc-codelens-action)
-" Map function and class text objects
-" NOTE: Requires 'textDocument.documentSymbol' support from the language server.
-xmap if <Plug>(coc-funcobj-i)
-omap if <Plug>(coc-funcobj-i)
-xmap af <Plug>(coc-funcobj-a)
-omap af <Plug>(coc-funcobj-a)
-xmap ic <Plug>(coc-classobj-i)
-omap ic <Plug>(coc-classobj-i)
-xmap ac <Plug>(coc-classobj-a)
-omap ac <Plug>(coc-classobj-a)
-" Remap <C-f> and <C-b> for scroll float windows/popups.
-if has('nvim-0.4.0') || has('patch-8.2.0750')
-  nnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
-  nnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
-  inoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(1)\<cr>" : "\<Right>"
-  inoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(0)\<cr>" : "\<Left>"
-  vnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
-  vnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
-endif
-" Use CTRL-S for selections ranges.
-" Requires 'textDocument/selectionRange' support of language server.
-nmap <silent> <C-s> <Plug>(coc-range-select)
-xmap <silent> <C-s> <Plug>(coc-range-select)
-" Add `:Format` command to format current buffer.
-command! -nargs=0 Format :call CocActionAsync('format')
-" Add `:Fold` command to fold current buffer.
-command! -nargs=? Fold :call     CocAction('fold', <f-args>)
-" Add `:OR` command for organize imports of the current buffer.
-command! -nargs=0 OR   :call     CocActionAsync('runCommand', 'editor.action.organizeImport')
-" Add (Neo)Vim's native statusline support.
-" NOTE: Please see `:h coc-status` for integrations with external plugins that
-" provide custom statusline: lightline.vim, vim-airline.
-set statusline^=%{coc#status()}%{get(b:,'coc_current_function','')}
-" Mappings for CoCList
-" Show all diagnostics.
-nnoremap <silent><nowait> <space>cd  :<C-u>CocCommand fzf-preview.CocDiagnostics<cr>
-" Manage extensions.
-nnoremap <silent><nowait> <space>ce  :<C-u>CocList extensions<cr>
-" Show commands.
-nnoremap <silent><nowait> <space>cc  :<C-u>CocCommand fzf-preview.CommandPalette<cr>
-" Find symbol of current document.
-nnoremap <silent><nowait> <space>co  :<C-u>CocOutline<cr>
-" Search workspace symbols.
-nnoremap <silent><nowait> <space>cs  :<C-u>CocCommand fzf-preview.BufferLines<cr>
-" Do default action for next item.
-nnoremap <silent><nowait> <space>cj  :<C-u>CocNext<CR>
-" Do default action for previous item.
-nnoremap <silent><nowait> <space>ck  :<C-u>CocPrev<CR>
-" Resume latest coc list.
-nnoremap <silent><nowait> <space>cp  :<C-u>CocListResume<CR>
-" show references with fzf
-nnoremap <silent><nowait> <space>cr  :<C-u>CocCommand fzf-preview.CocReferences<CR>
-" show implementations with fzf
-nnoremap <leader><nowait> <space>ci  :<C-U>CocCommand fzf-preview.CocImplementations<Cr>
-" show locationlist with fzf_preview
-nnoremap <silent><nowait> <space>cl  :<C-u>CocCommand fzf-preview.LocationList<CR>
-
-"------------------------------------------------------------------------------
-"which key
-"------------------------------------------------------------------------------
-
-set timeoutlen=400
-
-"------------------------------------------------------------------------------
-" Floaterm
-"------------------------------------------------------------------------------
-
-let g:floaterm_width = 0.80
-let g:floaterm_height = 0.88
-let g:floaterm_wintype = 'float'
-let g:floaterm_position = 'center'
-let g:floaterm_opener = 'edit'
-
-let g:floaterm_autoclose = 1
-" let g:floaterm_autohide = 2
-
 "------------------------------------------------------------------------------
 " custom commands
 "------------------------------------------------------------------------------
+" command! -bang -nargs=? -complete=dir Files
+"   \ call fzf#run(fzf#wrap('files', fzf#vim#with_preview({'dir': <q-args>, 'sink': 'e', 'source': 'rg --files --hidden'}), <bang>0))
+command! -bang -nargs=? -complete=dir Files
+    \ call fzf#vim#files(<q-args>, fzf#vim#with_preview({'options': ['--layout=reverse', '--info=inline']}), <bang>0)
+
+command! -bang -nargs=? -complete=dir AllFiles
+  \ call fzf#run(fzf#wrap('allfiles', fzf#vim#with_preview({'dir': <q-args>, 'sink': 'e', 'source': 'rg --files --hidden --no-ignore'}), <bang>0))
 
 command! Reload execute "source ~/.vimrc"
 command! Config execute ":e ~/.vimrc"
@@ -572,93 +226,9 @@ command! Env execute ":Dotenv .env"
 command! MakeTags !ctags -R .
 command! Ovewrite execute ":w !sudo tee %"
 command! Aniwrapper execute ":FloatermNew aniwrapper -qtdoomone -D 144"
-
 "------------------------------------------------------------------------------
 "KEYBINDINGS
 "------------------------------------------------------------------------------
-
 let g:mapleader = "\<Space>"
 let g:maplocalleader = ','
-" imap <TAB> <C-N>
-nmap <F4> :set paste!<Bar>set paste?<CR>
-nmap <F5> :!
-" nmap <C-n> :NERDTreeToggle<CR>
-nmap <C-n> :NvimTreeToggle<CR>
-" nnoremap <C-T> :wa<CR>:vertical botright term ++kill=term<CR>
-nmap Q !!$SHELL<CR>
-
-" reselect visual selection after indent
-vnoremap < <gv
-vnoremap > >gv
-
-" open file under cursor, create if necessary
-nnoremap gF :edit <cfile><cr>
-
-" fzf
-nnoremap // :CocCommand fzf-preview.Lines<CR>
-nnoremap ?? :CocCommand fzf-preview.BufferLines<CR>
-
-" aniwrapper/ani-cli (until i find better use for a keys)
-nmap <leader>as :FloatermNew --title=aniwrapper aniwrapper -qtdoomone -D144<CR>
-nmap <leader>ad :FloatermNew --title=aniwrapper ani-cli -q720p -cd/home/sudacode/Videos/sauce -D144<CR>
-" buffers
-nmap <leader>bB :CocCommand fzf-preview.AllBuffers<CR>
-nmap <leader>bb :CocCommand fzf-preview.Buffers<CR>
-nmap <leader>bk :bdelete<CR>
-nmap <leader>bn :bnext<CR>
-nmap <leader>bp :bprev<CR>
-nmap <C-J> :bnext<CR>
-nmap <C-K> :bprev<CR>
-" git
-nmap <leader>gc :CocCommand fzf-preview.GitLogs<CR>
-nmap <leader>gf :CocCommand fzf-preview.GitFiles<CR>
-if has('nvim')
-  nmap <leader>gg :Neogit<CR>
-else
-  nmap <leader>gg :FloatermNew --title=lazygit --opener=vsplit --width=1.0 --height=1.0 lazygit<CR>
-endif
-nmap <leader>gs :CocCommand fzf-preview.GitStatus<CR>
-nmap gr  :<C-u>CocCommand fzf-preview.CocReferences<CR>
-" help/history
-nmap <leader>hc :CocCommand fzf-preview.CommandPalette<CR>
-nmap <leader>hk :Maps<CR>
-" insert snippets
-nmap <leader>isp :-1read $HOME/Templates/python.py<CR>4jw
-" any jump plugin
-nmap <leader>j  :AnyJump<CR>
-nmap <leader>n :NvimTreeToggle<CR>
-" toggle/open
-nmap <leader>ob :FloatermNew --title=bpytop --opener=vsplit bpytop<CR>
-nmap <leader>od :FloatermNew --title=lazydocker --opener=vsplit lazydocker<CR>
-nmap <leader>on :FloatermNew --title=ncmpcpp --opener=vsplit ncmpcpp<CR>
-nmap <leader>oo :OverCommandLine<CR>
-nmap <leader>or :FloatermNew --title=ranger --opener=vsplit ranger --cmd="cd $PWD"<CR>
-" nmap <leader>ot :vertical botright ter ++kill=terminal ++close<CR>
-nmap <leader>ot :FloatermNew --title=floaterm --name=vsplit-term --wintype=vsplit --position=botright --width=0.5<CR>
-" refresh nvimtree for now
-nmap <leader>r :NvimTreeRefresh<CR>
-" search
-nmap <leader>sc :nohls<Cr>
-nmap <leader>sf :Files<Cr>
-nmap <leader>sF :AllFiles<Cr>
-" toggle coc outline
-nmap <leader>to :CocOutline<CR>
-" terminal
-nmap <leader>tt :FloatermToggle vsplit-term<CR>
-nmap <C-T> :wa<CR>:FloatermToggle floatingterm<CR>
-" for toggling/hiding the vsplit-term
-tnoremap <leader>tt <C-\><C-N>:FloatermToggle vsplit-term<CR>
-tnoremap <C-T> <C-\><C-n>:FloatermToggle floatingterm<CR>
-tnoremap <Esc> <C-\><C-n>
-
-
-nmap <Leader>ss :<C-u>SessionSave<CR>
-nmap <Leader>sl :<C-u>SessionLoad<CR>
-nnoremap <silent> <Leader>fh :DashboardFindHistory<CR>
-" search fzf, refs, impls, defs
-nmap <leader>ff :CocCommand fzf-preview.ProjectFiles<CR>
-" nnoremap <silent> <Leader>ff :DashboardFindFile<CR>
-nnoremap <silent> <Leader>tc :DashboardChangeColorscheme<CR>
-nnoremap <silent> <Leader>fa :DashboardFindWord<CR>
-nnoremap <silent> <Leader>fb :DashboardJumpMark<CR>
-nnoremap <silent> <Leader>cn :DashboardNewFile<CR>
+source ~/.vim/keybindings.vim

nvim/plugin-confs/dashboard-art.vim

@@ -0,0 +1,8 @@
+let g:dashboard_custom_header = [
+\ ' ███╗   ██╗ ███████╗ ██████╗  ██╗   ██╗ ██╗ ███╗   ███╗',
+\ ' ████╗  ██║ ██╔════╝██╔═══██╗ ██║   ██║ ██║ ████╗ ████║',
+\ ' ██╔██╗ ██║ █████╗  ██║   ██║ ██║   ██║ ██║ ██╔████╔██║',
+\ ' ██║╚██╗██║ ██╔══╝  ██║   ██║ ╚██╗ ██╔╝ ██║ ██║╚██╔╝██║',
+\ ' ██║ ╚████║ ███████╗╚██████╔╝  ╚████╔╝  ██║ ██║ ╚═╝ ██║',
+\ ' ╚═╝  ╚═══╝ ╚══════╝ ╚═════╝    ╚═══╝   ╚═╝ ╚═╝     ╚═╝',
+\]

nvim/plugin-confs/lsp-signature.lua

@@ -0,0 +1,56 @@
+ cfg = {
+  debug = false, -- set to true to enable debug logging
+  log_path = vim.fn.stdpath("cache") .. "/lsp_signature.log", -- log dir when debug is on
+  -- default is  ~/.cache/nvim/lsp_signature.log
+  verbose = false, -- show debug line number
+
+  bind = true, -- This is mandatory, otherwise border config won't get registered.
+               -- If you want to hook lspsaga or other signature handler, pls set to false
+  doc_lines = 10, -- will show two lines of comment/doc(if there are more than two lines in doc, will be truncated);
+                 -- set to 0 if you DO NOT want any API comments be shown
+                 -- This setting only take effect in insert mode, it does not affect signature help in normal
+                 -- mode, 10 by default
+
+  floating_window = true, -- show hint in a floating window, set to false for virtual text only mode
+
+  floating_window_above_cur_line = true, -- try to place the floating above the current line when possible Note:
+  -- will set to true when fully tested, set to false will use whichever side has more space
+  -- this setting will be helpful if you do not want the PUM and floating win overlap
+
+  floating_window_off_x = 1, -- adjust float windows x position.
+  floating_window_off_y = 1, -- adjust float windows y position.
+
+
+  fix_pos = false,  -- set to true, the floating window will not auto-close until finish all parameters
+  hint_enable = true, -- virtual hint enable
+  hint_prefix = "🐼 ",  -- Panda for parameter
+  hint_scheme = "String",
+  hi_parameter = "LspSignatureActiveParameter", -- how your parameter will be highlight
+  max_height = 12, -- max height of signature floating_window, if content is more than max_height, you can scroll down
+                   -- to view the hiding contents
+  max_width = 80, -- max_width of signature floating_window, line will be wrapped if exceed max_width
+  handler_opts = {
+    border = "rounded"   -- double, rounded, single, shadow, none
+  },
+
+  always_trigger = false, -- sometime show signature on new line or in middle of parameter can be confusing, set it to false for #58
+
+  auto_close_after = nil, -- autoclose signature float win after x sec, disabled if nil.
+  extra_trigger_chars = {}, -- Array of extra characters that will trigger signature completion, e.g., {"(", ","}
+  zindex = 200, -- by default it will be on top of all floating windows, set to <= 50 send it to bottom
+
+  padding = '', -- character to pad on left and right of signature can be ' ', or '|'  etc
+
+  transparency = nil, -- disabled by default, allow floating win transparent value 1~100
+  shadow_blend = 36, -- if you using shadow as border use this set the opacity
+  shadow_guibg = 'Black', -- if you using shadow as border use this set the color e.g. 'Green' or '#121315'
+  timer_interval = 200, -- default timer check interval set to lower value if you want to reduce latency
+  toggle_key = nil -- toggle signature on and off in insert mode,  e.g. toggle_key = '<M-x>'
+}
+
+-- recommended:
+require'lsp_signature'.setup(cfg) -- no need to specify bufnr if you don't use toggle_key
+
+-- You can also do this inside lsp on_attach
+-- note: on_attach deprecated
+-- require'lsp_signature'.on_attach(cfg, bufnr) -- no need to specify bufnr if you don't use toggle_key

nvim/plugin-confs/lspconfig.lua

@@ -0,0 +1,62 @@
+local DEFAULT_SETTINGS = {
+    ui = {
+        icons = {
+            -- The list icon to use for installed servers.
+            server_installed = "◍",
+            -- The list icon to use for servers that are pending installation.
+            server_pending = "◍",
+            -- The list icon to use for servers that are not installed.
+            server_uninstalled = "◍",
+        },
+        keymaps = {
+            -- Keymap to expand a server in the UI
+            toggle_server_expand = "<CR>",
+            -- Keymap to install a server
+            install_server = "i",
+            -- Keymap to reinstall/update a server
+            update_server = "u",
+            -- Keymap to update all installed servers
+            update_all_servers = "U",
+            -- Keymap to uninstall a server
+            uninstall_server = "X",
+        },
+    },
+
+    -- The directory in which to install all servers.
+    install_root_dir = "~/.vim/lsp",
+
+    pip = {
+        -- These args will be added to `pip install` calls. Note that setting extra args might impact intended behavior
+        -- and is not recommended.
+        --
+        -- Example: { "--proxy", "https://proxyserver" }
+        install_args = {},
+    },
+
+    -- Controls to which degree logs are written to the log file. It's useful to set this to vim.log.levels.DEBUG when
+    -- debugging issues with server installations.
+    log_level = vim.log.levels.INFO,
+
+    -- Limit for the maximum amount of servers to be installed at the same time. Once this limit is reached, any further
+    -- servers that are requested to be installed will be put in a queue.
+    max_concurrent_installers = 4,
+}
+
+
+local lsp_installer = require("nvim-lsp-installer")
+
+-- Register a handler that will be called for each installed server when it's ready (i.e. when installation is finished
+-- or if the server is already installed).
+lsp_installer.on_server_ready(function(server)
+    local opts = {}
+
+    -- (optional) Customize the options passed to the server
+    -- if server.name == "tsserver" then
+    --     opts.root_dir = function() ... end
+    -- end
+
+    -- This setup() function will take the provided server configuration and decorate it with the necessary properties
+    -- before passing it onwards to lspconfig.
+    -- Refer to https://github.com/neovim/nvim-lspconfig/blob/master/doc/server_configurations.md
+    server:setup(DEFAULT_SETTINGS)
+end)

nvim/plugin-confs/null-ls.lua

@@ -0,0 +1,86 @@
+local null_ls = require("null-ls")
+local helpers = require("null-ls.helpers")
+
+require("null-ls").setup({
+    sources = {
+        require("null-ls").builtins.formatting.stylua,
+        require("null-ls").builtins.diagnostics.eslint,
+        require("null-ls").builtins.completion.spell,
+        require("null-ls").builtins.formatting.shfmt.with({
+            extra_args = { "-i", "4", "-ci", "-sr" }
+        }),
+    },
+})
+
+local markdownlint = {
+    method = null_ls.methods.DIAGNOSTICS,
+    filetypes = { "markdown" },
+    -- null_ls.generator creates an async source
+    -- that spawns the command with the given arguments and options
+    generator = null_ls.generator({
+        command = "markdownlint",
+        args = { "--stdin" },
+        to_stdin = true,
+        from_stderr = true,
+        -- choose an output format (raw, json, or line)
+        format = "line",
+        check_exit_code = function(code, stderr)
+            local success = code <= 1
+
+            if not success then
+              -- can be noisy for things that run often (e.g. diagnostics), but can
+              -- be useful for things that run on demand (e.g. formatting)
+              print(stderr)
+            end
+
+            return success
+        end,
+        -- use helpers to parse the output from string matchers,
+        -- or parse it manually with a function
+        on_output = helpers.diagnostics.from_patterns({
+            {
+                pattern = [[:(%d+):(%d+) [%w-/]+ (.*)]],
+                groups = { "row", "col", "message" },
+            },
+            {
+                pattern = [[:(%d+) [%w-/]+ (.*)]],
+                groups = { "row", "message" },
+            },
+        }),
+    }),
+}
+
+local shellcheck = {
+    method = null_ls.methods.DIAGNOSTICS,
+    filetypes = { "sh", "bash", "zsh", "fish" },
+    generator = null_ls.generator({
+        command = "shellcheck",
+        args = {  "-S", "info", "-s", "bash", "-o", "all", "-e", "2250" },
+        from_stderr = true,
+        format = "line",
+        check_exit_code = function(code, stderr)
+            local success = code <= 1
+
+            if not success then
+              -- can be noisy for things that run often (e.g. diagnostics), but can
+              -- be useful for things that run on demand (e.g. formatting)
+              print(stderr)
+            end
+
+            return success
+        end,
+        on_output = helpers.diagnostics.from_patterns({
+            {
+                pattern = [[:(%d+):(%d+) [%w-/]+ (.*)]],
+                groups = { "row", "col", "message" },
+            },
+            {
+                pattern = [[:(%d+) [%w-/]+ (.*)]],
+                groups = { "row", "message" },
+            },
+        }),
+}),
+}
+
+null_ls.register(markdownlint)
+null_ls.register(shellcheck)

nvim/plugin-confs/symbols-outline.lua

@@ -0,0 +1,53 @@
+-- init.lua
+vim.g.symbols_outline = {
+    highlight_hovered_item = true,
+    show_guides = true,
+    auto_preview = true,
+    position = 'right',
+    relative_width = true,
+    width = 35,
+    auto_close = false,
+    show_numbers = false,
+    show_relative_numbers = false,
+    show_symbol_details = true,
+    preview_bg_highlight = 'Pmenu',
+    keymaps = { -- These keymaps can be a string or a table for multiple keys
+        close = {"<Esc>", "q"},
+        goto_location = "<Cr>",
+        focus_location = "o",
+        hover_symbol = "<C-space>",
+        toggle_preview = "K",
+        rename_symbol = "r",
+        code_actions = "a",
+    },
+    lsp_blacklist = {},
+    symbol_blacklist = {},
+    symbols = {
+        File = {icon = "", hl = "TSURI"},
+        Module = {icon = "", hl = "TSNamespace"},
+        Namespace = {icon = "", hl = "TSNamespace"},
+        Package = {icon = "", hl = "TSNamespace"},
+        Class = {icon = "𝓒", hl = "TSType"},
+        Method = {icon = "ƒ", hl = "TSMethod"},
+        Property = {icon = "", hl = "TSMethod"},
+        Field = {icon = "", hl = "TSField"},
+        Constructor = {icon = "", hl = "TSConstructor"},
+        Enum = {icon = "ℰ", hl = "TSType"},
+        Interface = {icon = "ﰮ", hl = "TSType"},
+        Function = {icon = "", hl = "TSFunction"},
+        Variable = {icon = "", hl = "TSConstant"},
+        Constant = {icon = "", hl = "TSConstant"},
+        String = {icon = "𝓐", hl = "TSString"},
+        Number = {icon = "#", hl = "TSNumber"},
+        Boolean = {icon = "⊨", hl = "TSBoolean"},
+        Array = {icon = "", hl = "TSConstant"},
+        Object = {icon = "⦿", hl = "TSType"},
+        Key = {icon = "🔐", hl = "TSType"},
+        Null = {icon = "NULL", hl = "TSType"},
+        EnumMember = {icon = "", hl = "TSField"},
+        Struct = {icon = "𝓢", hl = "TSType"},
+        Event = {icon = "🗲", hl = "TSType"},
+        Operator = {icon = "+", hl = "TSOperator"},
+        TypeParameter = {icon = "𝙏", hl = "TSParameter"}
+    }
+}

vim/plugin-confs/ale.vim

@@ -0,0 +1,20 @@
+"------------------------------------------------------------------------------
+"ale
+"------------------------------------------------------------------------------
+
+" lsp handled by coc
+let g:ale_disable_lsp = 1
+
+let g:ale_sh_shellcheck_executable = '/usr/bin/shellcheck'
+let g:ale_sh_shellcheck_options = '-S info -s bash -o all -e 2250'
+let g:ale_sh_shfmt_options = '-i=4 -ci -sr'
+let g:ale_fix_on_save = 1
+let g:ale_set_loclist=1
+let g:ale_set_quickfix=0
+let g:ale_virtualenv_dir_names = ['env']
+
+let g:ale_linter_aliases = {'javascriptreact': ['css', 'javascript'], 'typescriptreact': ['css', 'javascript']}
+let g:ale_linters = {'javascriptreact': ['css', 'javascript'], 'typescriptreact': ['css', 'javascript'], 'python': ['pylint','pycodestyle', 'pydocstyle'], 'sh': ['shellcheck']}
+" Fix files with prettier, and then ESLint.
+let g:ale_fixers = {'*': ['remove_trailing_lines', 'trim_whitespace'], 'javascript': ['prettier', 'eslint'], 'sh': ['shfmt'], 'typescript': ['eslint'], 'python': ['black']}
+

vim/plugin-confs/coc.vim

@@ -0,0 +1,129 @@
+"------------------------------------------------------------------------------
+" NICE COC
+"------------------------------------------------------------------------------
+
+" Always show the signcolumn, otherwise it would shift the text each time
+" diagnostics appear/become resolved.
+if has("nvim-0.5.0") || has("patch-8.1.1564")
+  " Recently vim can merge signcolumn and number column into one
+  set signcolumn=number
+else
+  set signcolumn=yes
+endif
+inoremap <silent><expr> <TAB>
+      \ pumvisible() ? "\<C-n>" :
+      \ <SID>check_back_space() ? "\<TAB>" :
+      \ coc#refresh()
+inoremap <expr><S-TAB> pumvisible() ? "\<C-p>" : "\<C-h>"
+function! s:check_back_space() abort
+  let col = col('.') - 1
+  return !col || getline('.')[col - 1]  =~# '\s'
+endfunction
+" Use <c-space> to trigger completion.
+if has('nvim')
+  inoremap <silent><expr> <c-space> coc#refresh()
+else
+  inoremap <silent><expr> <c-@> coc#refresh()
+endif
+" Make <CR> auto-select the first completion item and notify coc.nvim to
+" format on enter, <cr> could be remapped by other vim plugin
+inoremap <silent><expr> <cr> pumvisible() ? coc#_select_confirm()
+                              \: "\<C-g>u\<CR>\<c-r>=coc#on_enter()\<CR>"
+nmap <silent> [g <Plug>(coc-diagnostic-prev)
+nmap <silent> ]g <Plug>(coc-diagnostic-next)
+" GoTo code navigation.
+nmap <silent> gd <Plug>(coc-definition)
+nmap <silent> gy <Plug>(coc-type-definition)
+nmap <silent> gi <Plug>(coc-implementation)
+nmap <silent> gr <Plug>(coc-references)
+" Use K to show documentation in preview window.
+nnoremap <silent> K :call <SID>show_documentation()<CR>
+function! s:show_documentation()
+  if (index(['vim','help'], &filetype) >= 0)
+    execute 'h '.expand('<cword>')
+  elseif (coc#rpc#ready())
+    call CocActionAsync('doHover')
+  else
+    execute '!' . &keywordprg . " " . expand('<cword>')
+  endif
+endfunction
+" Highlight the symbol and its references when holding the cursor.
+autocmd CursorHold * silent call CocActionAsync('highlight')
+" Symbol renaming.
+nmap <leader>rn <Plug>(coc-rename)
+" Formatting selected code.
+xmap <leader>f  <Plug>(coc-format-selected)
+nmap <leader>f  <Plug>(coc-format-selected)
+augroup mygroup
+  autocmd!
+  " Setup formatexpr specified filetype(s).
+  autocmd FileType typescript,json,python,py,sh,bash setl formatexpr=CocAction('formatSelected')
+  " Update signature help on jump placeholder.
+  autocmd User CocJumpPlaceholder call CocActionAsync('showSignatureHelp')
+augroup end
+" Applying codeAction to the selected region.
+" Example: `<leader>aap` for current paragraph
+xmap <leader>a  <Plug>(coc-codeaction-selected)
+nmap <leader>a  <Plug>(coc-codeaction-selected)
+" Remap keys for applying codeAction to the current buffer.
+nmap <leader>ac  <Plug>(coc-codeaction)
+" Apply AutoFix to problem on the current line.
+nmap <leader>qf  <Plug>(coc-fix-current)
+" Run the Code Lens action on the current line.
+nmap <leader>cl  <Plug>(coc-codelens-action)
+" Map function and class text objects
+" NOTE: Requires 'textDocument.documentSymbol' support from the language server.
+xmap if <Plug>(coc-funcobj-i)
+omap if <Plug>(coc-funcobj-i)
+xmap af <Plug>(coc-funcobj-a)
+omap af <Plug>(coc-funcobj-a)
+xmap ic <Plug>(coc-classobj-i)
+omap ic <Plug>(coc-classobj-i)
+xmap ac <Plug>(coc-classobj-a)
+omap ac <Plug>(coc-classobj-a)
+" Remap <C-f> and <C-b> for scroll float windows/popups.
+if has('nvim-0.4.0') || has('patch-8.2.0750')
+  nnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
+  nnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
+  inoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(1)\<cr>" : "\<Right>"
+  inoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? "\<c-r>=coc#float#scroll(0)\<cr>" : "\<Left>"
+  vnoremap <silent><nowait><expr> <C-f> coc#float#has_scroll() ? coc#float#scroll(1) : "\<C-f>"
+  vnoremap <silent><nowait><expr> <C-b> coc#float#has_scroll() ? coc#float#scroll(0) : "\<C-b>"
+endif
+" Use CTRL-S for selections ranges.
+" Requires 'textDocument/selectionRange' support of language server.
+nmap <silent> <C-s> <Plug>(coc-range-select)
+xmap <silent> <C-s> <Plug>(coc-range-select)
+" Add `:Format` command to format current buffer.
+command! -nargs=0 Format :call CocActionAsync('format')
+" Add `:Fold` command to fold current buffer.
+command! -nargs=? Fold :call     CocAction('fold', <f-args>)
+" Add `:OR` command for organize imports of the current buffer.
+command! -nargs=0 OR   :call     CocActionAsync('runCommand', 'editor.action.organizeImport')
+" Add (Neo)Vim's native statusline support.
+" NOTE: Please see `:h coc-status` for integrations with external plugins that
+" provide custom statusline: lightline.vim, vim-airline.
+set statusline^=%{coc#status()}%{get(b:,'coc_current_function','')}
+" Mappings for CoCList
+" Show all diagnostics.
+nnoremap <silent><nowait> <space>cd  :<C-u>CocCommand fzf-preview.CocDiagnostics<cr>
+" Manage extensions.
+nnoremap <silent><nowait> <space>ce  :<C-u>CocList extensions<cr>
+" Show commands.
+nnoremap <silent><nowait> <space>cc  :<C-u>CocCommand fzf-preview.CommandPalette<cr>
+" Find symbol of current document.
+nnoremap <silent><nowait> <space>co  :<C-u>CocOutline<cr>
+" Search workspace symbols.
+nnoremap <silent><nowait> <space>cs  :<C-u>CocCommand fzf-preview.BufferLines<cr>
+" Do default action for next item.
+nnoremap <silent><nowait> <space>cj  :<C-u>CocNext<CR>
+" Do default action for previous item.
+nnoremap <silent><nowait> <space>ck  :<C-u>CocPrev<CR>
+" Resume latest coc list.
+nnoremap <silent><nowait> <space>cp  :<C-u>CocListResume<CR>
+" show references with fzf
+nnoremap <silent><nowait> <space>cr  :<C-u>CocCommand fzf-preview.CocReferences<CR>
+" show implementations with fzf
+nnoremap <leader><nowait> <space>ci  :<C-U>CocCommand fzf-preview.CocImplementations<Cr>
+" show locationlist with fzf_preview
+nnoremap <silent><nowait> <space>cl  :<C-u>CocCommand fzf-preview.LocationList<CR>

vim/plugin-confs/floaterm.vim

@@ -0,0 +1,13 @@
+"------------------------------------------------------------------------------
+" Floaterm
+"------------------------------------------------------------------------------
+
+let g:floaterm_width = 0.80
+let g:floaterm_height = 0.88
+let g:floaterm_wintype = 'float'
+let g:floaterm_position = 'center'
+let g:floaterm_opener = 'edit'
+
+let g:floaterm_autoclose = 1
+" let g:floaterm_autohide = 2
+

vim/plugin-confs/fzf.vim

@@ -0,0 +1,58 @@
+"------------------------------------------------------------------------------
+"fzf
+"------------------------------------------------------------------------------
+
+" This is the default extra key bindings
+let g:fzf_commands_expect = 'ctrl-enter'
+let g:fzf_buffers_jump = 1
+let g:fzf_tags_command = 'ctags -R'
+" This is the default option:
+"   - Preview window on the right with 50% width
+"   - CTRL-/ will toggle preview window.
+" - Note that this array is passed as arguments to fzf#vim#with_preview function.
+" - To learn more about preview window options, see `--preview-window` section of `man fzf`.
+let g:fzf_preview_window = ['right:50%', 'ctrl-/']
+let g:fzf_layout = { 'window': { 'width': 0.8, 'height': 0.75 } }
+
+let g:fzf_action = {
+  \ 'ctrl-t': 'tab split',
+  \ 'ctrl-x': 'split',
+  \ 'ctrl-v': 'vsplit' }
+
+" An action can be a reference to a function that processes selected lines
+function! s:build_quickfix_list(lines)
+  call setqflist(map(copy(a:lines), '{ "filename": v:val }'))
+  copen
+  cc
+endfunction
+
+let g:fzf_action = {
+  \ 'ctrl-q': function('s:build_quickfix_list'),
+  \ 'ctrl-t': 'tab split',
+  \ 'ctrl-x': 'split',
+  \ 'ctrl-v': 'vsplit',
+  \ 'ctrl-n': 'next',
+  \}
+
+" Customize fzf colors to match your color scheme
+" - fzf#wrap translates this to a set of `--color` options
+let g:fzf_colors =
+\ { 'fg':      ['fg', 'Normal'],
+  \ 'bg':      ['bg', 'Normal'],
+  \ 'hl':      ['fg', 'Comment'],
+  \ 'fg+':     ['fg', 'CursorLine', 'CursorColumn', 'Normal'],
+  \ 'bg+':     ['bg', 'CursorLine', 'CursorColumn'],
+  \ 'hl+':     ['fg', 'Statement'],
+  \ 'info':    ['fg', 'PreProc'],
+  \ 'border':  ['fg', 'Ignore'],
+  \ 'prompt':  ['fg', 'Conditional'],
+  \ 'pointer': ['fg', 'Exception'],
+  \ 'marker':  ['fg', 'Keyword'],
+  \ 'spinner': ['fg', 'Label'],
+  \ 'header':  ['fg', 'Comment'] }
+
+" Enable per-command history
+" - History files will be stored in the specified directory
+" - When set, CTRL-N and CTRL-P will be bound to 'next-history' and
+"   'previous-history' instead of 'down' and 'up'.
+let g:fzf_history_dir = '~/.local/share/fzf-history'

vim/plugin-confs/lightline.vim

@@ -0,0 +1,86 @@
+"------------------------------------------------------------------------------
+" Lightline
+"------------------------------------------------------------------------------
+
+let g:lightline = {}
+" 'one', 'material', 'darcula', 'deus'
+let g:lightline.colorscheme = "deus"
+" let g:lightline.colorscheme = "one"
+" let g:lightline.colorscheme = "darcula"
+let g:lightline.component_function = {
+      \   'fugitive': 'MyFugitive',
+      \   'readonly': 'Readonly',
+      \   'modified': 'Modified',
+      \   'filename': 'Filename',
+      \   'cocstatus': 'coc#status',
+      \}
+
+let g:lightline.component = { 'charhexvalue': '0x%B' }
+let g:lightline.separator = { 'left': "\ue0b0", 'right': "\ue0b2"  }
+let g:lightline.subseparator = { 'left': "\ue0b1", 'right': "\ue0b3"  }
+
+let g:lightline.component_expand = {
+      \  'linter_checking': 'lightline#ale#checking',
+      \  'linter_infos': 'lightline#ale#infos',
+      \  'linter_warnings': 'lightline#ale#warnings',
+      \  'linter_errors': 'lightline#ale#errors',
+      \  'linter_ok': 'lightline#ale#ok',
+      \ }
+
+let g:lightline.component_type = {
+      \     'linter_checking': 'right',
+      \     'linter_infos': 'right',
+      \     'linter_warnings': 'warning',
+      \     'linter_errors': 'error',
+      \     'linter_ok': 'right',
+      \ }
+
+let g:lightline.active = {
+            \   'left': [ [ 'mode', 'paste' ],
+            \             [ 'cocstatus', 'fugitive', 'filename' ] ],
+            \ 'right': [ [ 'linter_checking', 'linter_errors', 'linter_warnings', 'linter_infos', 'linter_ok' ],
+            \            [ 'lineinfo' ],
+	        \            [ 'percent' ],
+	        \            [ 'fileformat', 'fileencoding', 'filetype'] ] }
+
+let g:lightline#ale#indicator_checking = "\uf110 "
+let g:lightline#ale#indicator_infos = "\uf129 "
+let g:lightline#ale#indicator_warnings = "\uf071 "
+let g:lightline#ale#indicator_errors = "\uf05e "
+let g:lightline#ale#indicator_ok = "\uf00c "
+
+" Use autocmd to force lightline update.
+autocmd User CocStatusChange,CocDiagnosticChange call lightline#update()
+function! Modified()
+  if &filetype == "help"
+    return ""
+  elseif &modified
+    return "+"
+  elseif &modifiable
+    return ""
+  else
+    return ""
+  endif
+endfunction
+
+function! Readonly()
+  if &filetype == "help"
+    return ""
+  elseif &readonly
+    return "\ue0a2"
+  else
+    return ""
+  endif
+endfunction
+
+function! MyFugitive()
+    let _ = fugitive#head()
+    return strlen(_) ? "\ue0a0 "._ : ''
+endfunction
+
+function! Filename()
+  return ('' != Readonly() ? Readonly() . ' ' : '') .
+    \ ('' != expand('%:t') ? expand('%:t') : '[No Name]') .
+    \ ('' != Modified() ? ' ' . Modified() : '')
+endfunction
+

vim/plugin-confs/nerdtree.vim

@@ -0,0 +1,66 @@
+"------------------------------------------------------------------------------
+"NERDTREE
+"------------------------------------------------------------------------------
+
+autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif
+let g:NERDTreeWinPos = "right" "open nerdtree on the right
+let NERDTreeShowHidden=0 "show hidden files use capital 'I' to toggle
+let g:NERDTreeWinSize=45
+"autocmd VimEnter * wincmd p "put the cursor back into the editing pane on start
+let g:NERDTreeGitStatusIndicatorMapCustom = {
+                \ 'Modified'  :'✹',
+                \ 'Staged'    :'✚',
+                \ 'Untracked' :'✭',
+                \ 'Renamed'   :'➜',
+                \ 'Unmerged'  :'═',
+                \ 'Deleted'   :'✖',
+                \ 'Dirty'     :'✗',
+                \ 'Ignored'   :'☒',
+                \ 'Clean'     :'✔︎',
+                \ 'Unknown'   :'?',
+                \ }
+let g:NERDTreeGitStatusUseNerdFonts = 1
+" If more than one window and previous buffer was NERDTree, go back to it.
+autocmd BufEnter * if bufname('#') =~# "^NERD_tree_" && winnr('$') > 1 | b# | endif
+"avoid crashes when calling vim-plug functions while the cursor is on the NERDTree window
+let g:plug_window = 'noautocmd vertical topleft new'
+" NERDTress File highlighting
+function! NERDTreeHighlightFile(extension, fg, bg, guifg, guibg)
+ exec 'autocmd filetype nerdtree highlight ' . a:extension .' ctermbg='. a:bg .' ctermfg='. a:fg .' guibg='. a:guibg .' guifg='. a:guifg
+ exec 'autocmd filetype nerdtree syn match ' . a:extension .' #^\s\+.*'. a:extension .'$#'
+endfunction
+"NERDTree hilight files by extension
+call NERDTreeHighlightFile('jade', 'green', 'none', 'green', '#282c34')
+call NERDTreeHighlightFile('ini', 'yellow', 'none', 'yellow', '#282c34')
+call NERDTreeHighlightFile('md', 'blue', 'none', '#3366FF', '#282c34')
+call NERDTreeHighlightFile('yml', 'yellow', 'none', 'yellow', '#282c34')
+call NERDTreeHighlightFile('config', 'yellow', 'none', 'yellow', '#282c34')
+call NERDTreeHighlightFile('conf', 'yellow', 'none', 'yellow', '#282c34')
+call NERDTreeHighlightFile('json', 'yellow', 'none', 'yellow', '#282c34')
+call NERDTreeHighlightFile('html', 'red', 'none', 'yellow', '#282c34')
+call NERDTreeHighlightFile('styl', 'cyan', 'none', 'cyan', '#282c34')
+call NERDTreeHighlightFile('css', 'cyan', 'none', 'cyan', '#282c34')
+call NERDTreeHighlightFile('coffee', 'Red', 'none', 'red', '#282c34')
+call NERDTreeHighlightFile('js', 'yellow', 'none', '#ffa500', '#282c34')
+call NERDTreeHighlightFile('jsx', 'yellow', 'none', '#ffa500', '#282c34')
+call NERDTreeHighlightFile('tsx', 'yellow', 'none', '#ffa500', '#282c34')
+call NERDTreeHighlightFile('php', 'Magenta', 'none', '#ff00ff', '#282c34')
+call NERDTreeHighlightFile('cpp', 'blue', 'none', 'blue', '#282c34')
+call NERDTreeHighlightFile('h', 'cyan', 'none', 'cyan', '#282c34')
+call NERDTreeHighlightFile('txt', 'blue', 'none', 'red', '#282c34')
+let g:NERDTreeColorMapCustom = {
+    \ "Modified"  : ["#528AB3", "NONE", "NONE", "NONE"],
+    \ "Staged"    : ["#538B54", "NONE", "NONE", "NONE"],
+    \ "Untracked" : ["#BE5849", "NONE", "NONE", "NONE"],
+    \ "Dirty"     : ["#299999", "NONE", "NONE", "NONE"],
+    \ "Clean"     : ["#87939A", "NONE", "NONE", "NONE"]
+    \ }
+
+"------------------------------------------------------------------------------
+"PRETTIER
+"------------------------------------------------------------------------------
+
+packloadall "enable prettier
+let g:prettier#autoformat = 1
+let g:prettier#autoformat_require_pragma = 0
+let g:prettier#exec_cmd_path = "/usr/bin/prettier"

vim/plugin-confs/prettier.vim

@@ -0,0 +1,8 @@
+"------------------------------------------------------------------------------
+"PRETTIER
+"------------------------------------------------------------------------------
+
+packloadall "enable prettier
+let g:prettier#autoformat = 1
+let g:prettier#autoformat_require_pragma = 0
+let g:prettier#exec_cmd_path = "/usr/bin/prettier"

vim/plugin-confs/vim-closetag.vim

@@ -0,0 +1,34 @@
+"------------------------------------------------------------------------------
+"vim-closetag
+"------------------------------------------------------------------------------
+
+" filenames like *.xml, *.html, *.xhtml, ...
+" These are the file extensions where this plugin is enabled.
+let g:closetag_filenames = '*.html,*.xhtml,*.phtml,*.js,*.ts,*.jsx,*.tsx'
+
+" filenames like *.xml, *.xhtml, ...
+" This will make the list of non-closing tags self-closing in the specified files.
+"
+let g:closetag_xhtml_filenames = '*.xhtml,*.jsx,*.tsx,*.js,*.ts'
+
+" filetypes like xml, html, xhtml, ...
+" These are the file types where this plugin is enabled.
+"
+let g:closetag_filetypes = 'html,xhtml,phtml'
+
+" filetypes like xml, xhtml, ...
+" This will make the list of non-closing tags self-closing in the specified files.
+"
+let g:closetag_xhtml_filetypes = 'xhtml,jsx,tsx,js'
+
+" integer value [0|1]
+" This will make the list of non-closing tags case-sensitive (e.g. `<Link>` will be closed while `<link>` won't.)
+"
+let g:closetag_emptyTags_caseSensitive = 1
+
+" Disables auto-close if not in a "valid" region (based on filetype)
+
+let g:closetag_regions = {
+    \ 'typescript.tsx': 'jsxRegion,tsxRegion',
+    \ 'javascript.jsx': 'jsxRegion',
+    \ }

vim/plugin-confs/wakatime.vim

@@ -0,0 +1,6 @@
+"------------------------------------------------------------------------------
+" WAKATIME
+"------------------------------------------------------------------------------
+
+let g:wakatime_PythonBinary = '/usr/bin/python'  " (Default: 'python')
+let g:wakatime_OverrideCommandPrefix = '/usr/bin/wakatime'  " (Default: '')

vim/plugin-confs/whichkey.vim

@@ -0,0 +1,2 @@
+nmap <silent> <leader>      :<c-u>WhichKey '<Space>'<CR>
+nmap <silent> <localleader> :<c-u>WhichKey  ','<CR>