diff --git a/i3-wm/config-desktop b/i3-wm/config-desktop
index 4246f30..154d891 100644
--- a/i3-wm/config-desktop
+++ b/i3-wm/config-desktop
@@ -479,7 +479,7 @@ bindsym $mod+f fullscreen toggle
 # change container layout (stacked, tabbed, toggle split)
 bindsym $mod+s layout stacking
 bindsym $mod+w layout tabbed
-bindsym $mod+Shift+e layout toggle split
+bindsym $mod+e layout toggle split
 
 # toggle tiling / floating
 bindsym $mod+Shift+space floating toggle
@@ -608,7 +608,7 @@ bindsym $mod+minus scratchpad show
 
 # bindsym Mod1+Shift+t [title="System Tray"] scratchpad show, resize set 250 260, move position center
 
-bindsym $mod+e exec --no-startup-id emacsclient -n -c ~
+bindsym $mod+Shift+e exec --no-startup-id emacsclient -n -c ~
 bindsym $mod+Shift+v exec --no-startup-id emacsclient -n -c -e '(+vterm/here nil)'
 bindsym $mod+Shift+Return exec --no-startup-id emacsclient -n -c -e '(+vterm/here nil)'
 bindsym Control+Shift+a exec --no-startup-id ~/SudacodeRice/scripts/emc ~/Projects/Scripts/aniwrapper
diff --git a/polybar-themes/sblocks/bars.ini b/polybar-themes/sblocks/bars.ini
new file mode 100644
index 0000000..3590ef7
--- /dev/null
+++ b/polybar-themes/sblocks/bars.ini
@@ -0,0 +1,617 @@
+;; ┌────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▄░█▀█░█▀▄░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▄░█▀█░█▀▄░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀░░▀░▀░▀░▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[bar]
+fill = 
+empty = 
+indicator = 
+
+[module/volume]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+master-soundcard = default
+speaker-soundcard = default
+headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <bar-volume>
+format-volume-prefix = 
+format-volume-prefix-padding = 1
+format-volume-prefix-background = ${color.blue}
+format-volume-prefix-foreground = ${color.foreground}
+format-volume-background = ${color.background-alt}
+format-volume-foreground = ${color.foreground}
+format-volume-overline = ${color.background}
+format-volume-underline = ${color.background}
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+format-muted-prefix-padding = 1
+format-muted-prefix-background = ${color.red}
+format-muted-overline = ${color.background}
+format-muted-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+label-volume-background = ${color.background-alt}
+label-volume-padding = 1
+
+; Available tokens:
+;   %percentage% (default
+label-muted = "Muted"
+label-muted-foreground = ${color.foreground}
+label-muted-background = ${color.background-alt}
+label-muted-padding = 1
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+ramp-volume-3 = 
+ramp-volume-4 = 
+ramp-volume-background = ${color.blue}
+ramp-volume-padding = 1
+
+; Only applies if <bar-volume> is used
+bar-volume-format = " %fill%%indicator%%empty% "
+bar-volume-width = 10
+bar-volume-gradient = false
+
+bar-volume-indicator = ${bar.indicator}
+bar-volume-indicator-foreground = ${color.foreground}
+
+bar-volume-fill = ${bar.fill}
+bar-volume-foreground-0 = ${color.foreground}
+bar-volume-foreground-1 = ${color.foreground}
+bar-volume-foreground-2 = ${color.foreground}
+
+bar-volume-empty = ${bar.empty}
+bar-volume-empty-foreground = ${color.gray}
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+ramp-headphones-background = ${color.blue}
+ramp-headphones-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/brightness]
+;type = internal/xbacklight
+type = internal/backlight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+;card = intel_backlight
+card = amdgpu_bl0
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <bar>
+format-prefix = 
+format-prefix-padding = 1
+format-prefix-background = ${color.lime}
+format-prefix-foreground = ${color.foreground}
+format-background = ${color.background-alt}
+format-foreground = ${color.foreground}
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+; Only applies if <bar> is used
+bar-format = " %fill%%indicator%%empty% "
+bar-width = 10
+bar-gradient = false
+
+bar-indicator = ${bar.indicator}
+bar-indicator-foreground = ${color.foreground}
+
+bar-fill = ${bar.fill}
+bar-foreground-0 = ${color.foreground}
+bar-foreground-1 = ${color.foreground}
+bar-foreground-2 = ${color.foreground}
+
+bar-empty = ${bar.empty}
+bar-empty-foreground = ${color.gray}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery_bar]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT1
+adapter = ACAD
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <bar-capacity>
+format-charging-prefix = 
+format-charging-prefix-padding = 1
+format-charging-prefix-background = ${color.green}
+format-charging-prefix-foreground = ${color.foreground}
+format-charging-background = ${color.background-alt}
+format-charging-foreground = ${color.foreground}
+format-charging-overline = ${color.background}
+format-charging-underline = ${color.background}
+
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <bar-capacity>
+format-discharging-prefix = 
+format-discharging-prefix-padding = 1
+format-discharging-prefix-background = ${color.pink}
+format-discharging-prefix-foreground = ${color.foreground}
+format-discharging-background = ${color.background-alt}
+format-discharging-foreground = ${color.foreground}
+format-discharging-overline = ${color.background}
+format-discharging-underline = ${color.background}
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+format-full = <label-full>
+format-full-prefix = 
+format-full-prefix-padding = 1
+format-full-prefix-background = ${color.red}
+format-full-prefix-foreground = ${color.foreground}
+format-full-background = ${color.background-alt}
+format-full-foreground = ${color.foreground}
+format-full-overline = ${color.background}
+format-full-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+
+label-charging = %percentage%%
+label-charging-background = ${color.background-alt}
+label-charging-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+label-discharging-background = ${color.background-alt}
+label-discharging-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+label-full = Full
+label-full-background = ${color.background-alt}
+label-full-padding = 1
+
+; Only applies if <bar-capacity> is used
+bar-capacity-format = " %fill%%indicator%%empty% "
+bar-capacity-width = 10
+bar-capacity-gradient = false
+
+bar-capacity-indicator = ${bar.indicator}
+bar-capacity-indicator-foreground = ${color.foreground}
+
+bar-capacity-fill = ${bar.fill}
+bar-capacity-foreground-0 = ${color.foreground}
+bar-capacity-foreground-1 = ${color.foreground}
+bar-capacity-foreground-2 = ${color.foreground}
+
+bar-capacity-empty = ${bar.empty}
+bar-capacity-empty-foreground = ${color.gray}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu_bar]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <bar-load><label>
+format-prefix = 
+format-prefix-padding = 1
+format-prefix-background = ${color.teal}
+format-prefix-foreground = ${color.foreground}
+format-background = ${color.background-alt}
+format-foreground = ${color.foreground}
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = "%percentage%% "
+
+; Only applies if <bar-load> is used
+bar-load-format = " %fill%%indicator%%empty% "
+bar-load-width = 10
+bar-load-gradient = false
+
+bar-load-indicator = ${bar.indicator}
+bar-load-indicator-foreground = ${color.foreground}
+
+bar-load-fill = ${bar.fill}
+bar-load-foreground-0 = ${color.foreground}
+bar-load-foreground-1 = ${color.foreground}
+bar-load-foreground-2 = ${color.foreground}
+
+bar-load-empty = ${bar.empty}
+bar-load-empty-foreground = ${color.gray}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem_bar]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+;;mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 30
+
+; Display fixed precision values
+; Default: false
+fixed-values = false
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <bar-used><label-mounted>
+format-mounted-prefix = 
+format-mounted-prefix-padding = 1
+format-mounted-prefix-background = ${color.purple}
+format-mounted-prefix-foreground = ${color.foreground}
+format-mounted-background = ${color.background-alt}
+format-mounted-foreground = ${color.foreground}
+format-mounted-overline = ${color.background}
+format-mounted-underline = ${color.background}
+
+; Available tags:
+;   <label-unmounted> (default)
+format-unmounted = <label-unmounted>
+format-unmounted-prefix = 
+format-unmounted-prefix-padding = 1
+format-unmounted-prefix-background = ${color.red}
+format-unmounted-prefix-foreground = ${color.foreground}
+format-unmounted-background = ${color.background-alt}
+format-unmounted-foreground = ${color.foreground}
+format-unmounted-overline = ${color.background}
+format-unmounted-underline = ${color.background}
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = "%used%/%total% "
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+label-unmounted = " %mountpoint%: not mounted "
+
+; Only applies if <bar-used> is used
+bar-used-format = " %fill%%indicator%%empty% "
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = ${bar.indicator}
+bar-used-indicator-foreground = ${color.foreground}
+
+bar-used-fill = ${bar.fill}
+bar-used-foreground-0 = ${color.foreground}
+bar-used-foreground-1 = ${color.foreground}
+bar-used-foreground-2 = ${color.foreground}
+
+bar-used-empty = ${bar.empty}
+bar-used-empty-foreground = ${color.gray}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory_bar]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 2
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <bar-used><label>
+format-prefix = 
+format-prefix-padding = 1
+format-prefix-background = ${color.indigo}
+format-prefix-foreground = ${color.foreground}
+format-background = ${color.background-alt}
+format-foreground = ${color.foreground}
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = "%mb_used% "
+
+; Only applies if <bar-used> is used
+bar-used-format = " %fill%%indicator%%empty% "
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = ${bar.indicator}
+bar-used-indicator-foreground = ${color.foreground}
+
+bar-used-fill = ${bar.fill}
+bar-used-foreground-0 = ${color.foreground}
+bar-used-foreground-1 = ${color.foreground}
+bar-used-foreground-2 = ${color.foreground}
+
+bar-used-empty = ${bar.empty}
+bar-used-empty-foreground = ${color.gray}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd_bar]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online = "<icon-prev><toggle><icon-next><label-song><label-time>" 
+format-online-prefix = 
+format-online-prefix-padding = 1
+format-online-prefix-background = ${color.green}
+format-online-prefix-foreground = ${color.foreground}
+format-online-background = ${color.background-alt}
+format-online-foreground = ${color.foreground}
+format-online-overline = ${color.background}
+format-online-underline = ${color.background}
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+format-offline = <label-offline>
+format-offline-prefix = 
+format-offline-prefix-padding = 1
+format-offline-prefix-background = ${color.red}
+format-offline-prefix-foreground = ${color.foreground}
+format-offline-background = ${color.background-alt}
+format-offline-foreground = ${color.foreground}
+format-offline-overline = ${color.background}
+format-offline-underline = ${color.background}
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song = " %artist% - %title% - %album%"
+label-song-maxlen = 45
+label-song-ellipsis = true
+label-song-background = ${color.background-alt}
+label-song-padding = 1
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+label-time = "%elapsed% / %total% "
+label-time-background = ${color.background-alt}
+label-time-padding = 1
+
+; Available tokens:
+;   None
+label-offline = " Offline "
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-pause = 
+icon-stop = 
+icon-next = 
+icon-prev = 
+icon-seekf = 
+icon-seekb = 
+icon-random = 
+icon-repeat = 
+icon-repeatone = 
+icon-single = 
+icon-consume =
+
+icon-next-background = ${color.gray}
+icon-next-padding = 1
+icon-prev-background = ${color.gray}
+icon-prev-padding = 1
+icon-pause-background = ${color.gray}
+icon-pause-padding = 1
+icon-play-background = ${color.gray}
+icon-play-padding = 1
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+toggle-on-foreground = ${color.primary}
+toggle-off-foreground = ${color.secondary}
+
+; Only applies if <bar-progress> is used
+bar-progress-format = " %fill%%indicator%%empty% "
+bar-progress-width = 15
+bar-progress-gradient = false
+
+bar-progress-indicator = ${bar.indicator}
+bar-progress-indicator-foreground = ${color.foreground}
+
+bar-progress-fill = ${bar.fill}
+bar-progress-foreground-0 = ${color.foreground}
+bar-progress-foreground-1 = ${color.foreground}
+bar-progress-foreground-2 = ${color.foreground}
+bar-progress-background-0 = ${color.background-alt}
+bar-progress-background-1 = ${color.background-alt}
+bar-progress-background-2 = ${color.background-alt}
+
+bar-progress-empty = ${bar.empty}
+bar-progress-empty-foreground = ${color.gray}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/polybar-themes/sblocks/colors.ini b/polybar-themes/sblocks/colors.ini
new file mode 100644
index 0000000..5916e5f
--- /dev/null
+++ b/polybar-themes/sblocks/colors.ini
@@ -0,0 +1,39 @@
+;; ┌────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[color]
+
+;; Use pywal.sh in scripts directory to use colors from an image/wallpaper.
+
+;; main colors
+background = #3B4252
+background-alt = #4C566A
+foreground = #ECEFF4
+foreground-alt = #E5E9F0
+primary = #A3BE8C
+
+white = #FFFFFF
+black = #000000
+red = #EC7875
+pink = #EC6798
+purple = #BE78D1
+blue = #75A4CD
+cyan = #00C7DF
+teal = #00B19F
+green = #61C766
+lime = #B9C244
+yellow = #EBD369
+amber = #EDB83F
+orange = #E57C46
+brown = #AC8476
+gray = #9E9E9E
+indigo = #6C77BB
+blue-gray = #6D8895
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/polybar-themes/sblocks/config.ini b/polybar-themes/sblocks/config.ini
new file mode 100644
index 0000000..27c7660
--- /dev/null
+++ b/polybar-themes/sblocks/config.ini
@@ -0,0 +1,297 @@
+;; ┌────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Global WM Settings
+
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 0
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; File Inclusion
+; include an external file, like module file, etc.
+
+include-file = ~/SudacodeRice/polybar-themes/sblocks/bars.ini
+include-file = ~/SudacodeRice/polybar-themes/sblocks/colors.ini
+include-file = ~/SudacodeRice/polybar-themes/sblocks/modules.ini
+include-file = ~/SudacodeRice/polybar-themes/sblocks/user_modules.ini
+include-file = ~/SudacodeRice/polybar-themes/sblocks/custom-mpd.ini
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Bar Settings
+
+[bar/main]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor = ${env:MONITOR:}
+
+; Use the specified monitor as a fallback if the main one is not found.
+; monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = true
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 95%
+; height = 34
+height = 40
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 2.5%
+offset-y = 0%
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.background}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.foreground}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+;;background-0 = 
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 0.0
+radius-bottom = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 5
+line-color = ${color.background}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed withing this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+border-bottom-size = 0
+border-bottom-color = ${color.primary}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 0
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 0
+module-margin-right = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = NotoSans-Regular:size=8;2
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+
+font-0 = "Terminus:size=10;3"
+font-1 = "waffle:size=10;3"
+font-2 = "FiraCode Nerd Font:size=10;3"
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+
+modules-left = sep launcher sep workspaces sep cust-mpd-prev custom-mpd cust-mpd-next
+modules-center = title
+; modules-right = color-switch sep alsa sep battery sep network sep date sep sysmenu sep
+modules-right = color-switch sep alsa sep sep network sep date sep sysmenu sep
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; The separator will be inserted between the output of each module
+separator =
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name = i3
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = en_US.UTF-8
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = none
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 24
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${color.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+wm-restack = i3
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+dpi = 90 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = true
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+; scroll-up =
+; scroll-down =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+;; WM Workspace Specific
+
+; bspwm
+;;scroll-up = bspwm-desknext
+;;scroll-down = bspwm-deskprev
+;;scroll-up = bspc desktop -f prev.local
+;;scroll-down = bspc desktop -f next.local
+
+;i3
+;;scroll-up = i3wm-wsnext
+;;scroll-down = i3wm-wsprev
+scroll-up = i3-msg workspace next_on_output
+scroll-down = i3-msg workspace prev_on_output
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+; This is done to prevent flood of update event.
+;
+; For example if 5 modules emit an update event at the same time, we really
+; just care about the last one. But if we wait too long for events to swallow
+; the bar would appear sluggish so we continue if timeout
+; expires or limit is reached.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+;throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = false
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Define fallback values used by all module formats
+;format-foreground = 
+;format-background = 
+;format-underline =
+;format-overline =
+;format-spacing =
+;format-padding =
+;format-margin =
+;format-offset =
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/polybar-themes/sblocks/custom-mpd.ini b/polybar-themes/sblocks/custom-mpd.ini
new file mode 100644
index 0000000..2cce460
--- /dev/null
+++ b/polybar-themes/sblocks/custom-mpd.ini
@@ -0,0 +1,35 @@
+[module/custom-mpd]
+type = custom/script
+tail = true
+interval = 0
+exec = $HOME/SudacodeRice/scripts/show-music.sh
+format = <label>
+click-left = exec $HOME/SudacodeRice/scripts/music-controls.sh -t
+click-right = alacritty -e ncmpcpp
+format-padding = 1
+; format-underline = #ecbe7b
+; format-foreground = #51afef
+format-background = ${color.background-alt}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+[module/cust-mpd-next]
+type = custom/script
+click-left = $HOME/SudacodeRice/scripts/music-controls.sh -n
+exec = $HOME/SudacodeRice/scripts/mpd-controls.sh next
+format-padding = 1
+format-background = ${color.background-alt}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+[module/cust-mpd-prev]
+type = custom/script
+click-left = $HOME/SudacodeRice/scripts/music-controls.sh -p
+exec = $HOME/SudacodeRice/scripts/mpd-controls.sh prev
+format-padding = 1
+format-background = ${color.background-alt}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
diff --git a/polybar-themes/sblocks/launch.sh b/polybar-themes/sblocks/launch.sh
new file mode 100755
index 0000000..6d384ae
--- /dev/null
+++ b/polybar-themes/sblocks/launch.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+# Add this script to your wm startup file.
+
+DIR="$HOME/.config/polybar/blocks"
+
+# Terminate already running bar instances
+killall -q polybar
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
+
+# Launch the bar
+polybar -q main -c "$DIR"/config.ini &
diff --git a/polybar-themes/sblocks/modules.ini b/polybar-themes/sblocks/modules.ini
new file mode 100644
index 0000000..972f786
--- /dev/null
+++ b/polybar-themes/sblocks/modules.ini
@@ -0,0 +1,1209 @@
+;; ┌────────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/alsa]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+master-soundcard = default
+speaker-soundcard = default
+headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume><label-volume>
+format-volume-overline = ${color.background}
+format-volume-underline = ${color.background}
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+format-muted-prefix-background = ${color.red}
+format-muted-prefix-padding = 1
+format-muted-overline = ${color.background}
+format-muted-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+label-volume-background = ${color.background-alt}
+label-volume-padding = 1
+
+; Available tokens:
+;   %percentage% (default
+label-muted = "Muted"
+label-muted-foreground = ${color.foreground}
+label-muted-background = ${color.background-alt}
+label-muted-padding = 1
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+ramp-volume-3 = 
+ramp-volume-4 = 
+ramp-volume-background = ${color.blue}
+ramp-volume-padding = 1
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+ramp-headphones-background = ${color.blue}
+ramp-headphones-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/backlight]
+;type = internal/xbacklight
+type = internal/backlight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+;card = intel_backlight
+card = amdgpu_bl0
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp><label>
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+label-background = ${color.background-alt}
+label-padding = 1
+
+; Only applies if <ramp> is used
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+ramp-background = ${color.lime}
+ramp-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT1
+adapter = ACAD
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <label-charging>
+format-charging-prefix = 
+format-charging-prefix-background = ${color.green}
+format-charging-prefix-padding = 1
+format-charging-overline = ${color.background}
+format-charging-underline = ${color.background}
+
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <ramp-capacity><label-discharging>
+format-discharging-overline = ${color.background}
+format-discharging-underline = ${color.background}
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+format-full = <label-full>
+format-full-prefix = 
+format-full-prefix-background = ${color.red}
+format-full-prefix-padding = 1
+format-full-overline = ${color.background}
+format-full-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+label-charging = %percentage%%
+label-charging-background = ${color.background-alt}
+label-charging-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+label-discharging-background = ${color.background-alt}
+label-discharging-padding = 1
+
+; Available tokens:
+;   %percentage% (default)
+label-full = Full
+label-full-background = ${color.background-alt}
+label-full-padding = 1
+
+; Only applies if <ramp-capacity> is used
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-3 = 
+ramp-capacity-4 = 
+ramp-capacity-background = ${color.pink}
+ramp-capacity-padding = 1
+
+; Only applies if <bar-capacity> is used
+;bar-capacity-width = 10
+
+; Only applies if <animation-charging> is used
+animation-charging-0 = 
+animation-charging-1 = 
+
+; Framerate in milliseconds
+animation-charging-framerate = 750
+
+; Only applies if <animation-discharging> is used
+;;animation-discharging-0 = ${battery.anim0}
+;;animation-discharging-1 = ${battery.anim1}
+
+; Framerate in milliseconds
+;animation-discharging-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/bspwm]
+;;type = internal/bspwm
+
+; Only show workspaces defined on the same output as the bar
+; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
+; Default: true
+;;pin-workspaces = true
+
+; Output mode flags after focused state label
+; Default: false
+;;inline-mode = false
+
+; Create click handler used to focus workspace
+; Default: true
+;;enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+;;enable-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+;;reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+;;fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; Note that the label needs to correspond with the bspwm workspace name
+;;ws-icon-0 = code;♚
+;;ws-icon-1 = office;♛
+;;ws-icon-2 = graphics;♜
+;;ws-icon-3 = mail;♝
+;;ws-icon-4 = web;♞
+;;ws-icon-default = ♟
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
+;   <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
+; Default: <label-state>
+;;format = <label-state> <label-mode>
+
+; Available tokens:
+;   %name%
+; Default: %name%
+;;label-monitor = %name%
+
+; If any values for label-dimmed-N are defined, the workspace/mode
+; colors will get overridden with those values if the monitor is out of focus
+; To only override workspaces in a specific state, use:
+;   label-dimmed-focused
+;   label-dimmed-occupied
+;   label-dimmed-urgent
+;   label-dimmed-empty
+;;label-dimmed-foreground = #555
+;;label-dimmed-underline = ${bar/top.background}
+;;label-dimmed-focused-background = #f00
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-focused = %icon%
+;;label-focused-foreground = #ffffff
+;;label-focused-background = #3f3f3f
+;;label-focused-underline = #fba922
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-occupied = %icon%
+;;label-occupied-underline = #555555
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-urgent = %icon%
+;;label-urgent-foreground = #000000
+;;label-urgent-background = #bd2c40
+;;label-urgent-underline = #9b0a20
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+;;label-empty = %icon%
+;;label-empty-foreground = #55
+
+; The following labels will be used to indicate the layout/mode
+; for the focused workspace. Requires <label-mode>
+;
+; Available tokens:
+;   None
+;label-monocle = 
+;label-tiled = 
+;label-fullscreen = 
+;label-floating = 
+;label-pseudotiled = P
+;label-locked = 
+;label-locked-foreground = #bd2c40
+;label-sticky = 
+;label-sticky-foreground = #fba922
+;label-private = 
+;label-private-foreground = #bd2c40
+
+; Separator in between workspaces
+;;label-separator = |
+;;label-separator-padding = 2
+;;label-separator-foreground = #ffb52a
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <label>
+format-prefix = 
+format-prefix-background = ${color.teal}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = "%percentage%%"
+label-background = ${color.background-alt}
+label-padding = 1
+
+; Spacing between individual per-core ramps
+;;ramp-coreload-spacing = 1
+;;ramp-coreload-0 = ${cpu.load0}
+;;ramp-coreload-1 = ${cpu.load1}
+
+;;ramp-load-0 = ${cpu.load0}
+;;ramp-load-1 = ${cpu.load1}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/date]
+type = internal/date
+
+; Seconds to sleep between updates
+interval = 1.0
+
+; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+;;date = %Y-%m-%d%
+
+; Optional time format
+time = "%I:%M %p"
+
+; if `date-alt` or `time-alt` is defined, clicking
+; the module will toggle between formats
+;;date-alt = %A, %d %B %Y
+time-alt = "%a, %d %b %Y"
+
+; Available tags:
+;   <label> (default)
+format = <label>
+format-prefix = 
+format-prefix-background = ${color.amber}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %date%
+;   %time%
+; Default: %date%
+label = %time%
+label-background = ${color.background-alt}
+label-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+;;mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 30
+
+; Display fixed precision values
+; Default: false
+fixed-values = true
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <label-mounted>
+format-mounted-prefix = 
+format-mounted-prefix-background = ${color.green}
+format-mounted-prefix-padding = 1
+format-mounted-overline = ${color.background}
+format-mounted-underline = ${color.background}
+
+; Available tags:
+;   <label-unmounted> (default)
+format-unmounted = <label-unmounted>
+format-unmounted-prefix = 
+format-unmounted-prefix-background = ${color.red}
+format-unmounted-prefix-padding = 1
+format-unmounted-overline = ${color.background}
+format-unmounted-underline = ${color.background}
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = "%free%"
+label-mounted-background = ${color.background-alt}
+label-mounted-padding = 1
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+label-unmounted = "%mountpoint%: NA"
+label-unmounted-background = ${color.background-alt}
+label-unmounted-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;;[module/github]
+;;type = internal/github
+
+; Accessing an access token stored in file
+;;token = ${file:/path/to/file/containing/github/access.token}
+
+; Accessing an access token stored in an environment variable
+;;token = ${env:GITHUB_ACCESS_TOKEN}
+
+; Whether empty notifications should be displayed or not
+;;empty-notifications = false
+
+; Number of seconds in between requests
+;;interval = 10
+
+; Available tags:
+;   <label> (default)
+;;format = <label>
+;;format-prefix = 
+
+; Available tokens:
+;   %notifications% (default)
+; Default: Notifications: %notifications%
+;;label = %notifications%
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/i3]
+type = internal/i3
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+;;pin-workspaces = true
+
+; This will split the workspace name on ':'
+; Default: false
+;;strip-wsnumbers = true
+
+; Sort the workspaces by index instead of the default
+; sorting that groups the workspaces by output
+; Default: false
+;;index-sort = true
+
+; Create click handler used to focus workspace
+; Default: true
+;;enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+;;enable-scroll = false
+
+; Wrap around when reaching the first/last workspace
+; Default: true
+;;wrapping-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+;;reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+;;fuzzy-match = true
+
+; ws-icon-[0-9]+ = label;icon
+; NOTE: The label needs to match the name of the i3 workspace
+;;ws-icon-0 = 1;♚
+;;ws-icon-1 = 2;♛
+;;ws-icon-2 = 3;♜
+;;ws-icon-3 = 4;♝
+;;ws-icon-4 = 5;♞
+;;ws-icon-default = ♟
+; NOTE: You cannot skip icons, e.g. to get a ws-icon-6
+; you must also define a ws-icon-5.
+
+; Available tags:
+;   <label-state> (default) - gets replaced with <label-(focused|unfocused|visible|urgent)>
+;   <label-mode> (default)
+;;format = <label-state> <label-mode>
+
+; Available tokens:
+;   %mode%
+; Default: %mode%
+;;label-mode = %mode%
+;;label-mode-padding = 2
+;;label-mode-background = #e60053
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-focused = %index%
+;;label-focused-foreground = #ffffff
+;;label-focused-background = #3f3f3f
+;;label-focused-underline = #fba922
+;;label-focused-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-unfocused = %index%
+;;label-unfocused-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-visible = %index%
+;;label-visible-underline = #555555
+;;label-visible-padding = 4
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+;   %output%
+; Default: %icon%  %name%
+;;label-urgent = %index%
+;;label-urgent-foreground = #000000
+;;label-urgent-background = #bd2c40
+;;label-urgent-padding = 4
+
+; Separator in between workspaces
+;;label-separator = |
+;;label-separator-padding = 2
+;;label-separator-foreground = #ffb52a
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <label>
+format-prefix = 
+format-prefix-background = ${color.brown}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = "%mb_used%"
+label-background = ${color.background-alt}
+label-padding = 1
+
+; Only applies if <ramp-used> is used
+;;ramp-used-0 = ${memory.used0}
+;;ramp-used-1 = ${memory.used1}
+;;ramp-used-2 = ${memory.used2}
+
+; Only applies if <ramp-free> is used
+;;ramp-free-0 = ${memory.free0}
+;;ramp-free-1 = ${memory.free1}
+;;ramp-free-2 = ${memory.free2}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online = <toggle><label-song><icon-next>
+;format-online-prefix = 
+format-online-overline = ${color.background}
+format-online-underline = ${color.background}
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+format-offline = <label-offline>
+format-offline-prefix = 
+format-offline-prefix-background = ${color.red}
+format-offline-prefix-padding = 1
+format-offline-overline = ${color.background}
+format-offline-underline = ${color.background}
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  "%artist% - %title%"
+label-song-maxlen = 55
+label-song-ellipsis = true
+label-song-background = ${color.background-alt}
+label-song-padding = 1
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+label-time = %elapsed% / %total%
+label-time-background = ${color.background-alt}
+label-time-padding = 1
+
+; Available tokens:
+;   None
+label-offline = "Offline"
+label-offline-background = ${color.background-alt}
+label-offline-padding = 1
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-play-background = ${color.red}
+icon-play-padding = 1
+icon-pause = 
+icon-pause-padding = 1
+icon-pause-background = ${color.green}
+icon-stop = " "
+icon-stop-background = ${color.background-alt}
+icon-next = " "
+icon-next-background = ${color.background-alt}
+icon-prev = " "
+icon-prev-background = ${color.background-alt}
+icon-seekf = 
+icon-seekb = 
+icon-random = 
+icon-repeat = 
+icon-repeatone = 
+icon-single = 
+icon-consume =
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+toggle-on-foreground = ${color.primary}
+toggle-off-foreground = ${color.red}
+
+; Only applies if <bar-progress> is used
+;;bar-progress-width = 45
+;;bar-progress-indicator = |
+;;bar-progress-fill = ─
+;;bar-progress-empty = ─
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; If you use both a wired and a wireless network, just add 2 module definitions. For example
+[module/wired-network]
+type = internal/network
+interface = eth0
+
+[module/wireless-network]
+type = internal/network
+interface = wlp3s0
+
+; Normal Module
+[module/network]
+type = internal/network
+interface = wlan0
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 1.0
+
+; Test connectivity every Nth update
+; A value of 0 disables the feature
+; NOTE: Experimental (needs more testing)
+; Default: 0
+;ping-interval = 3
+
+; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
+; Minimum output width of upload/download rate
+; Default: 3
+;;udspeed-minwidth = 5
+
+; Accumulate values from all interfaces
+; when querying for up/downspeed rate
+; Default: false
+accumulate-stats = true
+
+; Consider an `UNKNOWN` interface state as up.
+; Some devices have an unknown state, even when they're running
+; Default: false
+unknown-as-up = true
+
+; Available tags:
+;   <label-connected> (default)
+;   <ramp-signal>
+format-connected = <ramp-signal><label-connected>
+;format-connected-prefix = 
+format-connected-overline = ${color.background}
+format-connected-underline = ${color.background}
+
+; Available tags:
+;   <label-disconnected> (default)
+format-disconnected = <label-disconnected>
+format-disconnected-prefix = 
+format-disconnected-prefix-background = ${color.orange}
+format-disconnected-prefix-padding = 1
+format-disconnected-overline = ${color.background}
+format-disconnected-underline = ${color.background}
+
+; Available tags:
+;   <label-connected> (default)
+;   <label-packetloss>
+;   <animation-packetloss>
+;;format-packetloss = <animation-packetloss> <label-connected>
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: %ifname% %local_ip%
+label-connected = "%{A1:networkmanager_dmenu &:}%essid%%{A}"
+label-connected-background = ${color.background-alt}
+label-connected-padding = 1
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+; Default: (none)
+label-disconnected = "%{A1:networkmanager_dmenu &:}Offline%{A}"
+label-disconnected-background = ${color.background-alt}
+label-disconnected-padding = 1
+
+; Available tokens:
+;   %ifname%    [wireless+wired]
+;   %local_ip%  [wireless+wired]
+;   %local_ip6% [wireless+wired]
+;   %essid%     [wireless]
+;   %signal%    [wireless]
+;   %upspeed%   [wireless+wired]
+;   %downspeed% [wireless+wired]
+;   %linkspeed% [wired]
+; Default: (none)
+;label-packetloss = %essid%
+;label-packetloss-foreground = #eefafafa
+
+; Only applies if <ramp-signal> is used
+ramp-signal-0 = 
+ramp-signal-1 = 
+ramp-signal-2 = 
+ramp-signal-3 = 
+ramp-signal-background = ${color.purple}
+ramp-signal-padding = 1
+
+; Only applies if <animation-packetloss> is used
+;;animation-packetloss-0 = ⚠
+;;animation-packetloss-0-foreground = #ffa64c
+;;animation-packetloss-1 = ⚠
+;;animation-packetloss-1-foreground = #000000
+; Framerate in milliseconds
+;;animation-packetloss-framerate = 500
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/pulseaudio]
+type = internal/pulseaudio
+
+; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
+; If not, uses default sink
+sink = alsa_output.pci-0000_03_00.6.analog-stereo
+
+; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
+; Default: true
+use-ui-max = false
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume><label-volume>
+format-volume-overline = ${color.background}
+format-volume-underline = ${color.background}
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+format-muted-prefix-background = ${color.red}
+format-muted-prefix-padding = 1
+format-muted-overline = ${color.background}
+format-muted-underline = ${color.background}
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+label-volume-background = ${color.background-alt}
+label-volume-padding = 1
+
+; Available tokens:
+;   %percentage% (default
+label-muted = "Muted"
+label-muted-foreground = ${color.foreground}
+label-muted-background = ${color.background-alt}
+label-muted-padding = 1
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+ramp-volume-3 = 
+ramp-volume-4 = 
+ramp-volume-background = ${color.blue}
+ramp-volume-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/temperature]
+type = internal/temperature
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Thermal zone to use
+; To list all the zone types, run 
+; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
+; Default: 0
+thermal-zone = 0
+
+; Full path of temperature sysfs path
+; Use `sensors` to find preferred temperature source, then run
+; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
+; to find path to desired file
+; Default reverts to thermal zone setting
+;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input
+hwmon-path = /sys/devices/pci0000:00/0000:00:01.3/0000:01:00.0/hwmon/hwmon0/temp1_input
+
+; Threshold temperature to display warning label (in degrees celsius)
+; Default: 80
+warn-temperature = 65
+
+; Whether or not to show units next to the temperature tokens (°C, °F)
+; Default: true
+units = true
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+format = <ramp><label>
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tags:
+;   <label-warn> (default)
+;   <ramp>
+format-warn = <ramp><label-warn>
+format-warn-overline = ${color.background}
+format-warn-underline = ${color.background}
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label = %temperature-c%
+label-background = ${color.background-alt}
+label-padding = 1
+
+; Available tokens:
+;   %temperature% (deprecated)
+;   %temperature-c%   (default, temperature in °C)
+;   %temperature-f%   (temperature in °F)
+label-warn = "%temperature-c%"
+label-warn-background = ${color.background-alt}
+label-warn-padding = 1
+
+; Requires the <ramp> tag
+; The icon selection will range from 0 to `warn-temperature`
+; with the current temperature as index.
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+ramp-background = ${color.cyan}
+ramp-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/keyboard]
+type = internal/xkeyboard
+
+; List of indicators to ignore
+blacklist-0 = num lock
+blacklist-1 = scroll lock
+
+; Available tags:
+;   <label-layout> (default)
+;   <label-indicator> (default)
+format = <label-layout><label-indicator>
+format-prefix = 
+format-prefix-background = ${color.blue-gray}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %layout%
+;   %name%
+;   %number%
+; Default: %layout%
+label-layout = "%layout%"
+label-layout-background = ${color.background-alt}
+label-layout-padding = 1
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-indicator-on = "%name% "
+label-indicator-on-background = ${color.background-alt}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/title]
+type = internal/xwindow
+
+; Available tags:
+;   <label> (default)
+format = <label>
+format-prefix = 
+format-padding = 1
+format-foreground = ${color.foreground-alt}
+format-background = ${color.background-alt}
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %title%
+; Default: %title%
+label = " %title%"
+label-maxlen = 45
+
+; Used instead of label when there is no window title
+label-empty = " Desktop"
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/workspaces]
+type = internal/xworkspaces
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; Create click handler used to focus desktop
+; Default: true
+enable-click = true
+
+; Create scroll handlers used to cycle desktops
+; Default: true
+enable-scroll = true
+
+; icon-[0-9]+ = <desktop-name>;<icon>
+; NOTE: The desktop name needs to match the name configured by the WM
+; You can get a list of the defined desktops using:
+; $ xprop -root _NET_DESKTOP_NAMES
+; icon-0 = 1;
+; icon-1 = 2;
+; icon-2 = 3;
+; icon-3 = 4;
+; icon-4 = 5;
+; icon-default = 
+
+; Available tags:
+;   <label-monitor>
+;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
+; Default: <label-state>
+format = <label-state>
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %name%
+; Default: %name%
+label-monitor = %name%
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+; label-active = %icon%
+label-active = %icon% %name%
+label-active-foreground = ${color.foreground}
+label-active-background = ${color.primary}
+
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+; label-occupied = %icon%
+label-occupied = %icon% %name%
+label-occupied-foreground = ${color.foreground}
+label-occupied-background = ${color.gray}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+; label-urgent = %icon%
+label-urgent = %icon% %name%
+label-urgent-foreground = ${color.foreground}
+label-urgent-background = ${color.red}
+
+; Available tokens:
+;   %name%
+;   %icon%
+;   %index%
+; Default: %icon%  %name%
+; label-empty = %icon%
+label-empty = %icon% %name%
+label-empty-foreground = ${color.foreground}
+label-empty-background = ${color.background-alt}
+
+label-active-padding = 1
+label-urgent-padding = 1
+label-occupied-padding = 1
+label-empty-padding = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/polybar-themes/sblocks/preview.ini b/polybar-themes/sblocks/preview.ini
new file mode 100644
index 0000000..1c8dbc8
--- /dev/null
+++ b/polybar-themes/sblocks/preview.ini
@@ -0,0 +1,309 @@
+;; ┌────────────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀█░█▀▄░█▀▀░█░█░▀█▀░█▀▀░█░█░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▀░█▀▄░█▀▀░▀▄▀░░█░░█▀▀░█▄█░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░░░▀░▀░▀▀▀░░▀░░▀▀▀░▀▀▀░▀░▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Global WM Settings
+
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 0
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; File Inclusion
+; include an external file, like module file, etc.
+
+include-file = ~/.config/polybar/blocks/bars.ini
+include-file = ~/.config/polybar/blocks/colors.ini
+include-file = ~/.config/polybar/blocks/modules.ini
+include-file = ~/.config/polybar/blocks/user_modules.ini
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Bar Settings
+
+[bar/main]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor =
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 100%
+height = 34
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 0%
+offset-y = 0%
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.background}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.foreground}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+;;background-0 = 
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 0.0
+radius-bottom = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 5
+line-color = ${color.background}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed withing this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+border-bottom-size = 0
+border-bottom-color = ${color.primary}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 0
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 0
+module-margin-right = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = NotoSans-Regular:size=8;2
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+
+font-0 = "Terminus:size=10;3"
+font-1 = "waffle:size=10;3"
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[bar/top]
+inherit = bar/main
+offset-y = 10
+modules-center = sep launcher sep workspaces sep cpu sep memory sep mpd sep alsa sep battery sep network sep date sep sysmenu sep
+enable-ipc = true
+
+[bar/mid]
+inherit = bar/main
+offset-y = 54
+modules-center = volume sep brightness sep battery_bar sep cpu_bar sep filesystem_bar sep memory_bar sep mpd_bar
+enable-ipc = true
+
+[bar/bottom]
+inherit = bar/main
+offset-y = 98
+modules-center =  title sep menu sep term files browser settings sep filesystem sep temperature sep color-switch sep keyboard sep pulseaudio sep backlight sep updates sep powermenu sep
+enable-ipc = true
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; The separator will be inserted between the output of each module
+separator =
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name = 
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = none
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${color.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+;;wm-restack =
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+; dpi = 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+;enable-ipc = true
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+scroll-up =
+scroll-down =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+;; WM Workspace Specific
+
+; bspwm
+;;scroll-up = bspwm-desknext
+;;scroll-down = bspwm-deskprev
+;;scroll-up = bspc desktop -f prev.local
+;;scroll-down = bspc desktop -f next.local
+
+;i3
+;;scroll-up = i3wm-wsnext
+;;scroll-down = i3wm-wsprev
+;;scroll-up = i3-msg workspace next_on_output
+;;scroll-down = i3-msg workspace prev_on_output
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+; This is done to prevent flood of update event.
+;
+; For example if 5 modules emit an update event at the same time, we really
+; just care about the last one. But if we wait too long for events to swallow
+; the bar would appear sluggish so we continue if timeout
+; expires or limit is reached.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+;throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = false
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Define fallback values used by all module formats
+;format-foreground = 
+;format-background = 
+;format-underline =
+;format-overline =
+;format-spacing =
+;format-padding =
+;format-margin =
+;format-offset =
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/polybar-themes/sblocks/preview.sh b/polybar-themes/sblocks/preview.sh
new file mode 100755
index 0000000..f6be480
--- /dev/null
+++ b/polybar-themes/sblocks/preview.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+DIR="$HOME/.config/polybar/blocks"
+
+# Terminate already running bar instances
+killall -q polybar
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
+
+# Launch the preview bar
+polybar -q top -c "$DIR"/preview.ini &
+polybar -q mid -c "$DIR"/preview.ini &
+polybar -q bottom -c "$DIR"/preview.ini &
diff --git a/polybar-themes/sblocks/scripts/checkupdates b/polybar-themes/sblocks/scripts/checkupdates
new file mode 100755
index 0000000..4d8a5e8
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/checkupdates
@@ -0,0 +1,117 @@
+#!/usr/bin/bash
+#
+#   checkupdates: Safely print a list of pending updates.
+#
+#   Copyright (c) 2013 Kyle Keen <keenerd@gmail.com>
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+declare -r myname='checkupdates'
+declare -r myver='1.0.0'
+
+plain() {
+	(( QUIET )) && return
+	local mesg=$1; shift
+	printf "${BOLD}    ${mesg}${ALL_OFF}\n" "$@" >&1
+}
+
+msg() {
+	(( QUIET )) && return
+	local mesg=$1; shift
+	printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&1
+}
+
+msg2() {
+	(( QUIET )) && return
+	local mesg=$1; shift
+	printf "${BLUE}  ->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&1
+}
+
+ask() {
+	local mesg=$1; shift
+	printf "${BLUE}::${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}" "$@" >&1
+}
+
+warning() {
+	local mesg=$1; shift
+	printf "${YELLOW}==> $(gettext "WARNING:")${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+error() {
+	local mesg=$1; shift
+	printf "${RED}==> $(gettext "ERROR:")${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+# check if messages are to be printed using color
+unset ALL_OFF BOLD BLUE GREEN RED YELLOW
+if [[ -t 2 && ! $USE_COLOR = "n" ]]; then
+	# prefer terminal safe colored and bold text when tput is supported
+	if tput setaf 0 &>/dev/null; then
+		ALL_OFF="$(tput sgr0)"
+		BOLD="$(tput bold)"
+		BLUE="${BOLD}$(tput setaf 4)"
+		GREEN="${BOLD}$(tput setaf 2)"
+		RED="${BOLD}$(tput setaf 1)"
+		YELLOW="${BOLD}$(tput setaf 3)"
+	else
+		ALL_OFF="\e[1;0m"
+		BOLD="\e[1;1m"
+		BLUE="${BOLD}\e[1;34m"
+		GREEN="${BOLD}\e[1;32m"
+		RED="${BOLD}\e[1;31m"
+		YELLOW="${BOLD}\e[1;33m"
+	fi
+fi
+readonly ALL_OFF BOLD BLUE GREEN RED YELLOW
+
+
+if (( $# > 0 )); then
+	echo "${myname} v${myver}"
+	echo
+	echo "Safely print a list of pending updates"
+	echo
+	echo "Usage: ${myname}"
+	echo
+	echo 'Note: Export the "CHECKUPDATES_DB" variable to change the path of the temporary database.'
+	exit 0
+fi
+
+if ! type -P fakeroot >/dev/null; then
+	error 'Cannot find the fakeroot binary.'
+	exit 1
+fi
+
+if [[ -z $CHECKUPDATES_DB ]]; then
+	CHECKUPDATES_DB="${TMPDIR:-/tmp}/checkup-db-${USER}/"
+fi
+
+trap 'rm -f $CHECKUPDATES_DB/db.lck' INT TERM EXIT
+
+DBPath="$(pacman-conf DBPath)"
+if [[ -z "$DBPath" ]] || [[ ! -d "$DBPath" ]]; then
+	DBPath="/var/lib/pacman/"
+fi
+
+mkdir -p "$CHECKUPDATES_DB"
+ln -s "${DBPath}/local" "$CHECKUPDATES_DB" &> /dev/null
+if ! fakeroot -- pacman -Sy --dbpath "$CHECKUPDATES_DB" --logfile /dev/null &> /dev/null; then
+       error 'Cannot fetch updates'
+       exit 1
+fi
+pacman -Qu --dbpath "$CHECKUPDATES_DB" 2> /dev/null | grep -v '\[.*\]'
+
+exit 0
+
+# vim: set noet:
diff --git a/polybar-themes/sblocks/scripts/launcher.sh b/polybar-themes/sblocks/scripts/launcher.sh
new file mode 100755
index 0000000..e673cf1
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/launcher.sh
@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+
+FILE="$HOME/.config/polybar/blocks/scripts/rofi/colors.rasi"
+
+# random accent color
+COLORS=('#EC7875' '#EC6798' '#BE78D1' '#75A4CD' '#00C7DF' '#00B19F' '#61C766' \
+		'#B9C244' '#EBD369' '#EDB83F' '#E57C46' '#AC8476' '#6C77BB' '#6D8895')
+AC="${COLORS[$(( $RANDOM % 14 ))]}"
+sed -i -e "s/ac: .*/ac:   ${AC}FF;/g" $FILE
+sed -i -e "s/se: .*/se:   ${AC}40;/g" $FILE
+
+rofi -no-config -no-lazy-grab -show drun -modi drun -theme ~/.config/polybar/blocks/scripts/rofi/launcher.rasi
diff --git a/polybar-themes/sblocks/scripts/powermenu.sh b/polybar-themes/sblocks/scripts/powermenu.sh
new file mode 100755
index 0000000..9e264ca
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/powermenu.sh
@@ -0,0 +1,94 @@
+#!/usr/bin/env bash
+
+## Author  : Aditya Shakya
+## Mail    : adi1090x@gmail.com
+## Github  : @adi1090x
+## Twitter : @adi1090x
+
+dir="~/.config/polybar/blocks/scripts/rofi"
+uptime=$(uptime -p | sed -e 's/up //g')
+
+rofi_command="rofi -theme $dir/powermenu.rasi"
+
+# Options
+shutdown=" Shutdown"
+reboot=" Restart"
+lock=" Lock"
+suspend=" Sleep"
+logout=" Logout"
+
+# Confirmation
+confirm_exit() {
+	rofi -dmenu\
+		-i\
+		-no-fixed-num-lines\
+		-p "Are You Sure? : "\
+		-theme $dir/confirm.rasi
+}
+
+# Message
+msg() {
+	rofi -theme "$dir/message.rasi" -e "Available Options  -  yes / y / no / n"
+}
+
+# Variable passed to rofi
+options="$lock\n$suspend\n$logout\n$reboot\n$shutdown"
+
+chosen="$(echo -e "$options" | $rofi_command -p "Uptime: $uptime" -dmenu -selected-row 0)"
+case $chosen in
+    $shutdown)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			systemctl poweroff
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+    $reboot)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			systemctl reboot
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+    $lock)
+		if [[ -f /usr/bin/i3lock ]]; then
+			i3lock
+		elif [[ -f /usr/bin/betterlockscreen ]]; then
+			betterlockscreen -l
+		fi
+        ;;
+    $suspend)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			mpc -q pause
+			amixer set Master mute
+			systemctl suspend
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+    $logout)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			if [[ "$DESKTOP_SESSION" == "Openbox" ]]; then
+				openbox --exit
+			elif [[ "$DESKTOP_SESSION" == "bspwm" ]]; then
+				bspc quit
+			elif [[ "$DESKTOP_SESSION" == "i3" ]]; then
+				i3-msg exit
+			fi
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+esac
diff --git a/polybar-themes/sblocks/scripts/rofi/colors.rasi b/polybar-themes/sblocks/scripts/rofi/colors.rasi
new file mode 100644
index 0000000..87c1412
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/rofi/colors.rasi
@@ -0,0 +1,11 @@
+/* colors */
+
+* {
+  al:   #00000000;
+  bg:   #3B4252FF;
+  bga:  #4C566AFF;
+  fga:  #E5E9F0FF;
+  fg:   #ECEFF4FF;
+  ac:   #A3BE8CFF;
+  se:   #A3BE8C40;
+}
diff --git a/polybar-themes/sblocks/scripts/rofi/confirm.rasi b/polybar-themes/sblocks/scripts/rofi/confirm.rasi
new file mode 100644
index 0000000..28e9f4b
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/rofi/confirm.rasi
@@ -0,0 +1,24 @@
+/* Confirm Dialog */
+
+@import "colors.rasi"
+
+* {
+    background-color:       @bg;
+    text-color:             @fga;
+	font:				 	"Terminus 9";
+}
+
+window {
+    width:      			210px;
+    padding:    			25px;
+    border:					0px 0px 2px 0px;
+    border-radius:          0px;
+    border-color:           @ac;
+    location:               center;
+    y-offset:               -2em;
+}
+
+entry {
+    expand: 				true;
+    text-color:				@ac;
+}
diff --git a/polybar-themes/sblocks/scripts/rofi/launcher.rasi b/polybar-themes/sblocks/scripts/rofi/launcher.rasi
new file mode 100644
index 0000000..2ad429c
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/rofi/launcher.rasi
@@ -0,0 +1,115 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Terminus 9";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    display-drun: 					"";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px 0px 0px 0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							550px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						6px 7px 4px 7px;
+	background-color: 				@ac;
+	text-color: 					@fg;
+	font:							"feather 8";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @fg;
+    placeholder-color:              @fg;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search...";
+	padding: 						6px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ prompt, entry ];
+    background-color:               @bga;
+    text-color:                     @fg;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        0px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        0px;
+    columns:                        2;
+    lines:                          8;
+    spacing:                        6px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	6px;
+    padding:                        6px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fga;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+	padding: 						3px;
+}
+
+element-icon {
+    size:                           24px;
+    border:                         0px;
+}
+
+element-text {
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 2.5px 0px 2.5px;
+}
+
+element selected {
+    background-color:               @se;
+    text-color:                     @fga;
+	border:							0px 0px 0px 0px;
+    border-radius:                  0px;
+    border-color:                  	@ac;
+}
diff --git a/polybar-themes/sblocks/scripts/rofi/message.rasi b/polybar-themes/sblocks/scripts/rofi/message.rasi
new file mode 100644
index 0000000..04cce94
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/rofi/message.rasi
@@ -0,0 +1,24 @@
+/* Confirm Dialog */
+
+@import "colors.rasi"
+
+* {
+    background-color:       @bg;
+    text-color:             @fga;
+	font:				 	"Terminus 9";
+}
+
+window {
+    width:      			320px;
+    padding:    			25px;
+    border:					0px 0px 2px 0px;
+    border-radius:          0px;
+    border-color:           @ac;
+    location:               center;
+    y-offset:               -2em;
+}
+
+entry {
+    expand: 				true;
+    text-color:				@ac;
+}
diff --git a/polybar-themes/sblocks/scripts/rofi/networkmenu.rasi b/polybar-themes/sblocks/scripts/rofi/networkmenu.rasi
new file mode 100644
index 0000000..7f05c8e
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/rofi/networkmenu.rasi
@@ -0,0 +1,123 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Terminus 9";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    display-drun: 					"";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px 0px 0px 0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							400px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						6px 7px 4px 7px;
+	background-color: 				@bga;
+	text-color: 					@fg;
+}
+
+textbox-prompt-colon {
+	padding: 						6px 7px 4px 7px;
+	background-color: 				@ac;
+	text-color: 					@fg;
+	expand: false;
+	str: "";
+	font:							"feather 8";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @fg;
+    placeholder-color:              @fg;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search...";
+	padding: 						6px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ textbox-prompt-colon, prompt ];
+    background-color:               @bga;
+    text-color:                     @fg;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        0px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        0px;
+    columns:                        1;
+    lines:                          8;
+    spacing:                        6px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	6px;
+    padding:                        6px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fga;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+	padding: 						3px 3px 3px -12px;
+}
+
+element-icon {
+    size:                           24px;
+    border:                         0px;
+}
+
+element-text {
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 2.5px 0px 2.5px;
+}
+
+element selected {
+    background-color:               @se;
+    text-color:                     @fga;
+	border:							0px 0px 0px 0px;
+    border-radius:                  0px;
+    border-color:                  	@ac;
+}
diff --git a/polybar-themes/sblocks/scripts/rofi/powermenu.rasi b/polybar-themes/sblocks/scripts/rofi/powermenu.rasi
new file mode 100644
index 0000000..8c54acb
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/rofi/powermenu.rasi
@@ -0,0 +1,123 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Terminus 9";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    display-drun: 					"";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px 0px 0px 0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							300px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						6px 7px 4px 7px;
+	background-color: 				@bga;
+	text-color: 					@fg;
+}
+
+textbox-prompt-colon {
+	padding: 						6px 7px 4px 7px;
+	background-color: 				@ac;
+	text-color: 					@fg;
+	expand: false;
+	str: "";
+	font:							"feather 8";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @fg;
+    placeholder-color:              @fg;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search...";
+	padding: 						6px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ textbox-prompt-colon, prompt ];
+    background-color:               @bga;
+    text-color:                     @fg;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        0px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        0px;
+    columns:                        1;
+    lines:                          5;
+    spacing:                        6px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	6px;
+    padding:                        6px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fga;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+	padding: 						3px 3px 3px -23px;
+}
+
+element-icon {
+    size:                           24px;
+    border:                         0px;
+}
+
+element-text {
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 2.5px 0px 2.5px;
+}
+
+element selected {
+    background-color:               @se;
+    text-color:                     @fga;
+	border:							0px 0px 0px 0px;
+    border-radius:                  0px;
+    border-color:                  	@ac;
+}
diff --git a/polybar-themes/sblocks/scripts/rofi/styles.rasi b/polybar-themes/sblocks/scripts/rofi/styles.rasi
new file mode 100644
index 0000000..f1a85ef
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/rofi/styles.rasi
@@ -0,0 +1,123 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Terminus 9";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    display-drun: 					"";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px 0px 0px 0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							300px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						6px 7px 4px 7px;
+	background-color: 				@bga;
+	text-color: 					@fg;
+}
+
+textbox-prompt-colon {
+	padding: 						6px 7px 4px 7px;
+	background-color: 				@ac;
+	text-color: 					@fg;
+	expand: false;
+	str: "";
+	font:							"feather 8";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @fg;
+    placeholder-color:              @fg;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search...";
+	padding: 						6px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ textbox-prompt-colon, entry ];
+    background-color:               @bga;
+    text-color:                     @fg;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        0px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        0px;
+    columns:                        1;
+    lines:                          5;
+    spacing:                        6px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	6px;
+    padding:                        6px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fga;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+	padding: 						3px 3px 3px -23px;
+}
+
+element-icon {
+    size:                           24px;
+    border:                         0px;
+}
+
+element-text {
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 2.5px 0px 2.5px;
+}
+
+element selected {
+    background-color:               @se;
+    text-color:                     @fga;
+	border:							0px 0px 0px 0px;
+    border-radius:                  0px;
+    border-color:                  	@ac;
+}
diff --git a/polybar-themes/sblocks/scripts/style-switch.sh b/polybar-themes/sblocks/scripts/style-switch.sh
new file mode 100755
index 0000000..4731479
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/style-switch.sh
@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+
+SDIR="$HOME/.config/polybar/blocks/scripts"
+
+# Launch Rofi
+MENU="$(rofi -no-config -no-lazy-grab -sep "|" -dmenu -i -p '' \
+-theme $SDIR/rofi/styles.rasi \
+<<< " Default| Nord| Gruvbox| Adapta| Cherry|")"
+            case "$MENU" in
+				*Default) "$SDIR"/styles.sh --default ;;
+				*Nord) "$SDIR"/styles.sh --nord ;;
+				*Gruvbox) "$SDIR"/styles.sh --gruvbox ;;
+				*Adapta) "$SDIR"/styles.sh --adapta ;;
+				*Cherry) "$SDIR"/styles.sh --cherry ;;
+            esac
diff --git a/polybar-themes/sblocks/scripts/styles.sh b/polybar-themes/sblocks/scripts/styles.sh
new file mode 100755
index 0000000..507f069
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/styles.sh
@@ -0,0 +1,74 @@
+#!/usr/bin/env bash
+
+# Color files
+PFILE="$HOME/.config/polybar/blocks/colors.ini"
+RFILE="$HOME/.config/polybar/blocks/scripts/rofi/colors.rasi"
+
+# Change colors
+change_color() {
+	# polybar
+	sed -i -e "s/background = #.*/background = $BG/g" $PFILE
+	sed -i -e "s/background-alt = #.*/background-alt = $BGA/g" $PFILE
+	sed -i -e "s/foreground = #.*/foreground = $FG/g" $PFILE
+	sed -i -e "s/foreground-alt = #.*/foreground-alt = $FGA/g" $PFILE
+	sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE
+	
+	# rofi
+	cat > $RFILE <<- EOF
+	/* colors */
+
+	* {
+	  al:   #00000000;
+	  bg:   ${BG}FF;
+	  bga:  ${BGA}FF;
+	  fga:  ${FGA}FF;
+	  fg:   ${FG}FF;
+	  ac:   ${AC}FF;
+	  se:   ${AC}40;
+	}
+	EOF
+	
+	polybar-msg cmd restart
+}
+
+if  [[ $1 = "--default" ]]; then
+	BG="#2f343f"
+	BGA="#C4C7C5"
+	FGA="#C4C7C5"
+	FG="#1C1E20"
+	AC="#B4BC67"
+	change_color
+elif  [[ $1 = "--nord" ]]; then
+	BG="#3B4252"
+	BGA="#4C566A"
+	FGA="#E5E9F0"
+	FG="#ECEFF4"
+	AC="#A3BE8C"
+	change_color
+elif  [[ $1 = "--gruvbox" ]]; then
+	BG="#282828"
+	BGA="#EBDBB2"
+	FGA="#EBDBB2"
+	FG="#282828"
+	AC="#CC241D"
+	change_color
+elif  [[ $1 = "--adapta" ]]; then
+	BG="#243035"
+	BGA="#38444A"
+	FGA="#FDF6E3"
+	FG="#FFFFFF"
+	AC="#4DD0E1"
+	change_color
+elif  [[ $1 = "--cherry" ]]; then
+	BG="#1F1626"
+	BGA="#423949"
+	FGA="#FFFFFF"
+	FG="#FFFFFF"
+	AC="#D94085"
+	change_color
+else
+	cat <<- _EOF_
+	No option specified, Available options:
+	--default    --nord    --gruvbox    --adapta    --cherry
+	_EOF_
+fi
diff --git a/polybar-themes/sblocks/scripts/updates.sh b/polybar-themes/sblocks/scripts/updates.sh
new file mode 100755
index 0000000..70edf26
--- /dev/null
+++ b/polybar-themes/sblocks/scripts/updates.sh
@@ -0,0 +1,45 @@
+#!/usr/bin/env bash
+
+NOTIFY_ICON=/usr/share/icons/Papirus/32x32/apps/system-software-update.svg
+
+get_total_updates() { UPDATES=$(checkupdates 2>/dev/null | wc -l); }
+
+while true; do
+    get_total_updates
+
+    # notify user of updates
+    if hash notify-send &>/dev/null; then
+        if (( UPDATES > 50 )); then
+            notify-send -u critical -i $NOTIFY_ICON \
+                "You really need to update!!" "$UPDATES New packages"
+        elif (( UPDATES > 25 )); then
+            notify-send -u normal -i $NOTIFY_ICON \
+                "You should update soon" "$UPDATES New packages"
+        elif (( UPDATES > 2 )); then
+            notify-send -u low -i $NOTIFY_ICON \
+                "$UPDATES New packages"
+        fi
+    fi
+
+    # when there are updates available
+    # every 10 seconds another check for updates is done
+    while (( UPDATES > 0 )); do
+        if (( UPDATES == 1 )); then
+            echo "$UPDATES"
+        elif (( UPDATES > 1 )); then
+            echo "$UPDATES"
+        else
+            echo "None"
+        fi
+        sleep 10
+        get_total_updates
+    done
+
+    # when no updates are available, use a longer loop, this saves on CPU
+    # and network uptime, only checking once every 30 min for new updates
+    while (( UPDATES == 0 )); do
+        echo "None"
+        sleep 1800
+        get_total_updates
+    done
+done
diff --git a/polybar-themes/sblocks/user_modules.ini b/polybar-themes/sblocks/user_modules.ini
new file mode 100644
index 0000000..e70ea66
--- /dev/null
+++ b/polybar-themes/sblocks/user_modules.ini
@@ -0,0 +1,292 @@
+;; ┌──────────────────────────────────────────────────────────────────────────────-----┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█░█░█▀▀░█▀▀░█▀▄░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀ │
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░▀▀█░█▀▀░█▀▄░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█ │
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀░▀░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀ │
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └──────────────────────────────────────────────────────────────────────────────-----┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/updates]
+type = custom/script
+
+; Available tokens:
+;   %counter%
+; Command to be executed (using "/usr/bin/env sh -c [command]")
+exec = ~/.config/polybar/blocks/scripts/updates.sh
+
+; Conditional command that, if defined, needs to exit successfully
+; before the main exec command is invoked.
+; Default: ""
+;;exec-if = ""
+
+; Will the script output continous content?
+; Default: false
+tail = true
+
+; Seconds to sleep between updates
+; Default: 2 (0 if `tail = true`)
+interval = 5
+
+; Available tags:
+;   <output> - deprecated
+;   <label> (default)
+format = <label>
+format-prefix = 
+format-prefix-background = ${color.yellow}
+format-prefix-padding = 1
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+; Available tokens:
+;   %output%
+; Default: %output%
+label = %output%
+label-background = ${color.background-alt}
+label-padding = 1
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c [command]"
+click-left = exo-open --launch TerminalEmulator &
+click-right = exo-open --launch TerminalEmulator &
+;;double-click-left = echo double left %counter%
+;;double-click-middle = echo double middle %counter%
+;;double-click-right = echo double right %counter%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c [command]"
+;;scroll-up = echo scroll up %counter%
+;;scroll-down = echo scroll down %counter%
+
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/launcher]
+type = custom/text
+
+content-prefix = 
+content-prefix-background = ${color.teal}
+content-prefix-padding = 1
+
+content = " Menu "
+content-background = ${color.background-alt}
+content-foreground = ${color.foreground}
+content-overline = ${color.background}
+content-underline = ${color.background}
+
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
+click-left = ~/.config/polybar/blocks/scripts/launcher.sh &
+;;click-middle = ~/.config/polybar/blocks/scripts/launcher-full
+click-right = ~/.config/polybar/blocks/scripts/style-switch.sh &
+
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
+;;scroll-up = ~/.config/polybar/blocks/scripts/launcher.sh &
+;;scroll-down = ~/.config/polybar/blocks/scripts/color-switch.sh &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sysmenu]
+type = custom/text
+
+content-prefix = 
+content-prefix-background = ${color.cyan}
+content-prefix-padding = 1
+
+content = " System "
+content-background = ${color.background-alt}
+content-foreground = ${color.foreground}
+content-overline = ${color.background}
+content-underline = ${color.background}
+
+click-left = ~/.config/polybar/blocks/scripts/powermenu.sh &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/color-switch]
+type = custom/text
+
+content-prefix = 
+content-prefix-background = ${color.orange}
+content-prefix-padding = 1
+
+content = " Style "
+content-background = ${color.background-alt}
+content-foreground = ${color.foreground}
+content-overline = ${color.background}
+content-underline = ${color.background}
+
+click-left = ~/.config/polybar/blocks/scripts/style-switch.sh &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sep]
+type = custom/text
+content = |
+
+content-background = ${color.background}
+content-foreground = ${color.background}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/apps]
+type = custom/text
+content-overline = ${color.background}
+content-underline = ${color.background}
+content-padding = 1
+
+[module/term]
+inherit = module/apps
+content = 
+content-background = ${color.blue-gray}
+content-foreground = ${color.foreground}
+click-left = termite &
+click-middle = urxvt &
+click-right = xfce4-terminal &
+
+[module/files]
+inherit = module/apps
+content = 
+content-background = ${color.blue}
+content-foreground = ${color.foreground}
+click-left = thunar &
+click-right = pcmanfm &
+
+[module/browser]
+inherit = module/apps
+content = 
+content-background = ${color.orange}
+content-foreground = ${color.foreground}
+click-left = firefox &
+click-right = chromium &
+
+[module/settings]
+inherit = module/apps
+content = 
+content-background = ${color.teal}
+content-foreground = ${color.foreground}
+click-left = xfce4-settings-manager &
+click-right = lxappearance &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/powermenu]
+type = custom/menu
+
+; If true, <label-toggle> will be to the left of the menu items (default).
+; If false, it will be on the right of all the items.
+expand-right = true
+
+; "menu-LEVEL-N" has the same properties as "label-NAME" with
+; the additional "exec" property
+;
+; Available exec commands:
+;   menu-open-LEVEL
+;   menu-close
+; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
+menu-0-0 = " Reboot |"
+menu-0-0-background = ${color.background-alt}
+menu-0-0-exec = menu-open-1
+menu-0-1 = " Shutdown "
+menu-0-1-background = ${color.background-alt}
+menu-0-1-exec = menu-open-2
+
+menu-1-0 = " Back |"
+menu-1-0-background = ${color.background-alt}
+menu-1-0-exec = menu-open-0
+menu-1-1 = " Reboot "
+menu-1-1-background = ${color.background-alt}
+menu-1-1-exec = systemctl reboot
+
+menu-2-0 = " Shutdown |"
+menu-2-0-background = ${color.background-alt}
+menu-2-0-exec = systemctl poweroff
+menu-2-1 = " Back "
+menu-2-1-background = ${color.background-alt}
+menu-2-1-exec = menu-open-0
+
+; Available tags:
+;   <label-toggle> (default) - gets replaced with <label-(open|close)>
+;   <menu> (default)
+; Note that if you use <label-toggle> you must also include
+; the definition for <label-open>
+
+format = <label-toggle><menu>
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+label-open = 
+label-open-background = ${color.cyan}
+label-open-padding = 1
+label-close = 
+label-close-background = ${color.red}
+label-close-padding = 1
+
+; Optional item separator
+; Default: none
+;label-separator = " | "
+;label-separator-foreground = ${color.foreground}
+;label-separator-background = ${color.background-alt}
+
+;;label-open-foreground = ${color.foreground}
+;;label-close-foreground = ${color.background}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/menu]
+type = custom/menu
+
+; If true, <label-toggle> will be to the left of the menu items (default).
+; If false, it will be on the right of all the items.
+expand-right = true
+
+; "menu-LEVEL-N" has the same properties as "label-NAME" with
+; the additional "exec" property
+;
+; Available exec commands:
+;   menu-open-LEVEL
+;   menu-close
+; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
+menu-0-0 ="  Menu | "
+menu-0-0-background = ${color.background-alt}
+menu-0-0-exec = ~/.config/polybar/blocks/scripts/launcher.sh &
+
+menu-0-1 =" Files | "
+menu-0-1-background = ${color.background-alt}
+menu-0-1-exec = thunar &
+
+menu-0-2 =" Terminal | "
+menu-0-2-background = ${color.background-alt}
+menu-0-2-exec = termite &
+
+menu-0-3 =" Browser "
+menu-0-3-background = ${color.background-alt}
+menu-0-3-exec = firefox &
+
+; Available tags:
+;   <label-toggle> (default) - gets replaced with <label-(open|close)>
+;   <menu> (default)
+; Note that if you use <label-toggle> you must also include
+; the definition for <label-open>
+
+format = <label-toggle><menu>
+format-overline = ${color.background}
+format-underline = ${color.background}
+
+label-open = 
+label-open-background = ${color.yellow}
+label-open-padding = 1
+label-close = 
+label-close-background = ${color.red}
+label-close-padding = 1
+
+; Optional item separator
+; Default: none
+;label-separator = " | "
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
diff --git a/scripts/launch_desktop.sh b/scripts/launch_desktop.sh
index 533fbee..0cac26a 100755
--- a/scripts/launch_desktop.sh
+++ b/scripts/launch_desktop.sh
@@ -10,7 +10,9 @@ while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
 
 if type "xrandr"; then
 	for m in $(xrandr --query | grep " connected" | cut -d" " -f1); do
-		MONITOR=$m polybar --reload -c ~/SudacodeRice/polybar/config.desktop.ini main &
+		# MONITOR=$m polybar --reload -c ~/SudacodeRice/polybar/config.desktop.ini main &
+		# update to use new theme
+		MONITOR=$m polybar --reload -c "$HOME/SudacodeRice/polybar-themes/sblocks/config.ini" main &
 	done
 else
 	polybar --reload example &
diff --git a/scripts/mpd-controls.sh b/scripts/mpd-controls.sh
index 99d4bf0..10914f4 100755
--- a/scripts/mpd-controls.sh
+++ b/scripts/mpd-controls.sh
@@ -8,8 +8,8 @@ if [[ $checkRunning == '' ]]; then
 fi
 
 arg=$1
-if [[ $arg == 'next' ]]; then
+if [[ $arg == 'next' ]] || [[ "$arg" == "-n" ]]; then
 	echo "怜"
-elif [[ $arg == 'prev' ]]; then
+elif [[ $arg == 'prev' ]] || [[ "$arg" == "-p" ]]; then
 	echo "玲"
 fi