updates for laptop config

alacritty/doom_one.yml

@@ -2,7 +2,7 @@
 colors:
   # Default colors
   primary:
-    background: "#282c34"
+    background: "#24282f"
     foreground: "#bbc2cf"
   cursor:
     text: CellBackground

dunst/dunstrc

@@ -29,7 +29,7 @@
     # the top and down respectively.
     # The width can be negative.  In this case the actual width is the
     # screen width minus the width defined in within the geometry option.
-    geometry = "0x6-41+106"
+    geometry = "0x6-42+75"
 
     # Turn on the progess bar
     progress_bar = true
@@ -81,7 +81,8 @@
 
     # Defines width in pixels of frame around the notification window.
     # Set to 0 to disable.
-    frame_width = 7
+    # frame_width = 7
+    frame_width = 14
 
     # Defines color of the frame around the notification window.
     frame_color = "#aaaaaa"

dunst/dunstrc.desktop

@@ -296,7 +296,7 @@
     # dunst will attempt to calculate an appropriate dpi value for each monitor
     # using the resolution and physical size. This might be useful in setups
     # where there are multiple screens with very different dpi values.
-    per_monitor_dpi = false
+    per_monitor_dpi = true
 
 # The internal keyboard shortcut support in dunst is now considered deprecated
 # and should be replaced by dunstctl calls. You can use the configuration of your

i3-wm/config

@@ -11,45 +11,22 @@
 
 set $mod Mod1
 
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-font pango:monospace 8
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# The combination of xss-lock, nm-applet and pactl is a popular choice, so
-# they are included here as an example. Modify as you see fit.
-
-# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
-# screen before suspend. Use loginctl lock-session to lock your screen.
-exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
-
-# NetworkManager is the most popular way to manage wireless networks on Linux,
-# and nm-applet is a desktop environment-independent system tray GUI for it.
-exec --no-startup-id nm-applet
-
-# Use pactl to adjust volume in PulseAudio.
-set $refresh_i3status killall -SIGUSR1 i3status
-bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status; exec --no-startup-id ~/i3/scripts/dunst_volume/dunst_volume.py increase
-bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status; exec --no-startup-id ~/i3/scripts/dunst_volume/dunst_volume.py decrease
-bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status; exec --no-startup-id ~/i3/scripts/dunst_volume/dunst_volume.py mute
-bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3; exec --no-startup-id ~/i3/scripts/dunst_volume/dunst_volume.py mute
-
 set $up k
 set $down j
 set $left h
 set $right l
 
+# set $term gnome-terminal
+set $term alacritty
+
 # Use Mouse+$mod to drag floating windows to their wanted position
 floating_modifier $mod
 
 # start a terminal
-bindsym $mod+Return exec alacritty 
+bindsym $mod+Return exec --no-startup-id $term
 
 # kill focused window
-bindsym $mod+Shift+q kill
+bindsym $mod+q kill
 
 # start dmenu (a program launcher)
 # bindsym $mod+d exec --no-startup-id dmenu_run
@@ -93,9 +70,9 @@ bindsym $mod+v split v
 bindsym $mod+f fullscreen toggle
 
 # change container layout (stacked, tabbed, toggle split)
-bindsym $mod+Shift+s layout stacking
+bindsym $mod+s layout stacking
-bindsym $mod+Shift+w layout tabbed
+bindsym $mod+w layout tabbed
-bindsym $mod+Shift+e layout toggle split
+bindsym $mod+e layout toggle split
 
 # toggle tiling / floating
 bindsym $mod+Shift+space floating toggle
@@ -115,7 +92,8 @@ set $ws10 "0: ﭮ"
 set $ws1 "1: "
 set $ws2 "2: "
 set $ws3 "3: ﬏"
-set $ws4 "4: "
+# set $ws4 "4: "
+set $ws4 "4"
 set $ws5 "5"
 set $ws6 "6"
 set $ws7 "7"
@@ -312,17 +290,21 @@ mode "$mode_gaps_left" {
 }
 
 # set default gaps to 20
-gaps inner 20
+gaps top 20
+gaps left 5
+gaps right 5
+gaps bottom 5
+gaps inner 15
 
 ## I3-GAPS END
 
 # BORDERS
 
 # make all windows have a 3 pixel border
-for_window [class=".*"] border pixel 3
+for_window [class=".*"] border pixel 4
 
 # make calendar, todo, and spotify always only have border 3 pixels
-for_window[workspace="4: "] border pixel 3 
+# for_window[workspace="4: "] border pixel 5
 for_window[class="^Spotify$"] border none, gaps inner 60
 for_window[class="discord"] border none
 for_window[title="ncmpcpp 0.9.2"] border none
@@ -331,9 +313,9 @@ for_window[title="ncmpcpp 0.9.2"] border none
 title_align center
 
 ## client colors
-# class			border backgr  text    indicate  child_border
+# class border backgr  text    indicate  child_border
 # client.focused #56a7b5 #282c34 #ffffff #2e9ef4 #56a7b5 
-client.focused #2878af #282c34 #ffffff #2e9ef4 #2878af 
+client.focused #51afef #282c34 #ffffff #2e9ef4 #2878af
 # client.focused #a8d385 #282c34 #ffffff #50b62c #a8d385
 client.unfocused #3d4450 #282c34 #ffffff #1e90ff #3d4450
 
@@ -354,7 +336,40 @@ for_window [class="plasmashell" window_type="notification"] floating enable, bor
 # no_focus [class="plasmashell" window_type="notification"]
 for_window [class="Steam"] floating enable
 
-## Keybindings
+
+
+# Font for window titles. Will also be used by the bar unless a different font
+# is used in the bar {} block below.
+# font pango:monospace 8
+
+# This font is widely installed, provides lots of unicode glyphs, right-to-left
+# text rendering and scalability on retina/hidpi displays (thanks to pango).
+font pango:DejaVu Sans Mono 10
+
+# The combination of xss-lock, nm-applet and pactl is a popular choice, so
+# they are included here as an example. Modify as you see fit.
+
+# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the
+# screen before suspend. Use loginctl lock-session to lock your screen.
+exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock --nofork
+
+# NetworkManager is the most popular way to manage wireless networks on Linux,
+# and nm-applet is a desktop environment-independent system tray GUI for it.
+exec --no-startup-id nm-applet
+
+# Use pactl to adjust volume in PulseAudio.
+set $refresh_i3status killall -SIGUSR1 i3status
+
+
+## ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+## KEYBINDINGS
+## ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+
+bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +10% && $refresh_i3status; exec --no-startup-id ~/SudacodeRice/scripts/dunst_volume/dunst_volume.py increase
+bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -10% && $refresh_i3status; exec --no-startup-id ~/SudacodeRice/scripts/dunst_volume/dunst_volume.py decrease
+bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle && $refresh_i3status; exec --no-startup-id ~/SudacodeRice/scripts/dunst_volume/dunst_volume.py mute
+bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle && $refresh_i3; exec --no-startup-id ~/SudacodeRice/scripts/dunst_volume/dunst_volume.py mute
+
 # Alt+: a, b, d, f, h, j, k, l, m, n, o, p, r, s, u, v, y, space, tab, windows,
 # F5
 # Alt+Shift: s, w, e, q, r, h, j, k, l, n, p, space
@@ -370,7 +385,7 @@ bindsym $mod+F7 exec --no-startup-id rofi-mpd -a
 bindsym $mod+m exec --no-startup-id rofi-mpd -s
 
 # start rofi tabswitcher
-bindsym Mod1+ISO_Left_Tab exec --no-startup-id $HOME/scripts/tabswitcher.sh
+bindsym Mod1+ISO_Left_Tab exec --no-startup-id $HOME/SudacodeRice/scripts/tabswitcher.sh
 # changer borders
 bindsym Mod1+y border pixel 3
 # bindsym Mod1+t border normal 3
@@ -384,42 +399,45 @@ bindsym Mod1+u border none
 bindsym Mod1+d exec --no-startup-id ~/scripts/dmenu.sh 
 
 # launch rofi menu and menu full
-bindsym Mod1+o exec --no-startup-id $HOME/scripts/menu_full
+bindsym Mod1+o exec --no-startup-id $HOME/SudacodeRice/scripts/menu_full
 # bindsym Mod1+d exec --no-startup-id /home/sudacode/scripts/menu
 
 # bind the windows key to menu
-bindsym Super_L exec --no-startup-id $HOME/scripts/menu
+# bindsym Super_L exec --no-startup-id $HOME/SudacodeRice/scripts/menu
-
+bindsym Super_L exec --no-startup-id $HOME/.config/eww/launch_eww
-# bind Alt s to flameshot_full script
-bindsym Mod1+s exec --no-startup-id $HOME/scripts/flameshot_full.sh
 
 # launch pavucontrol with Alt+p
-bindsym Mod1+p exec --no-startup-id $HOME/scripts/pavucontrol.sh
+bindsym Mod1+p exec --no-startup-id $HOME/SudacodeRice/scripts/pavucontrol.sh
 
 ## Spotify/Mpd controls
 # Bind F4 to Next Song
 bindsym XF86AudioPrev exec --no-startup-id $HOME/SudacodeRice/scripts/spotify-controls.sh -b;\
-        exec --no-startup-id $HOME/i3/scripts/music-controls.sh -p
+        exec --no-startup-id $HOME/SudacodeRice/scripts/music-controls.sh -p
 # Bind F6 to Pause/Play
 bindsym XF86AudioPlay exec --no-startup-id $HOME/SudacodeRice/scripts/spotify-controls.sh -p;\
-        exec --no-startup-id $HOME/i3/scripts/music-controls.sh -t
+        exec --no-startup-id $HOME/SudacodeRice/scripts/music-controls.sh -t
 # Bind F5 to Next Song
 bindsym XF86AudioNext exec --no-startup-id $HOME/SudacodeRice/scripts/spotify-controls.sh -n;\
-        exec --no-startup-id $HOME/i3/scripts/music-controls.sh -n
+        exec --no-startup-id $HOME/SudacodeRice/scripts/music-controls.sh -n
 
 ## Music Mpd/Ncmpcpp/Playerctl
 # Bind Alt n to open ncmpcpp
-bindsym Mod1+n exec --no-startup-id alacritty -e ncmpcpp
+bindsym Mod1+n exec --no-startup-id $term -e ncmpcpp
 
 # Bind Alt b to launch bpytop
-bindsym Mod1+b exec --no-startup-id alacritty -e bpytop
+bindsym Mod1+b exec --no-startup-id $term -e bpytop
 
 # get a new wallpaper
 bindsym Control+Mod1+n exec --no-startup-id $HOME/SudacodeRice/scripts/new-wallpaper.sh
+# bindsym Control+Mod1+n exec --no-startup-id variety -n
+# bindsym Mod1+Shift++ exec --no-startup-id variety -f
 
 bindsym Control+Mod1+f exec --no-startup-id firefox
 
+
+## ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 ## ASSIGN TO WORKSPACES
+## ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 assign [class="^firefox$"] "2: "
 assign [class="^Code$"] "3: ﬏"
 # assign [class="^plasmawindowed$" name="TodoList"] "4: "
@@ -436,19 +454,30 @@ assign [class="^discord$"] workspace $ws10
 
 ## ON STARTUP
 # launch polybar on startup
-exec_always --no-startup-id ~/SudacodeRice/scripts/launch.sh
+exec_always --no-startup-id /home/sudacode/SudacodeRice/scripts/launch.sh
 
 # launch picom in the background
-exec_always --no-startup-id ~/SudacodeRice/scripts/picom.sh
+exec_always --no-startup-id /home/sudacode/scripts/picom.sh
 
 # run wallpaper script to set random wallpaper
-exec_always --no-startup-id ~/SudacodeRice/scripts/wallpaper.sh
+exec_always --no-startup-id /home/sudacode/SudacodeRice/scripts/new-wallpaper.sh
+exec --no-startup-id /home/sudacode/SudacodeRice/scripts/new-wallpaper.sh
 
 # start the calendar and todolist plasmoids
-exec --no-startup-id ~/SudacodeRice/scripts/calendar.sh
+# exec --no-startup-id ~/SudacodeRice/scripts/calendar.sh
-exec --no-startup-id ~/SudacodeRice/scripts/todo.sh
+# exec --no-startup-id ~/SudacodeRice/scripts/todo.sh
 
-exec --no-startup-id alacritty -e ncmpcpp
+exec --no-startup-id /usr/bin/alternating_layouts.py
+
+
+exec --no-startup-id ~/.bin/eww daemon
+
+exec --no-startup-id $term -e ncmpcpp
+
+# exec --no-startup-id variety
+
+# Make the currently focused window a scratchpad
+bindsym $mod+Shift+a exec --no-startup-id /usr/local/bin/aniwrapper
 
 # Make the currently focused window a scratchpad
 bindsym $mod+Shift+minus move scratchpad
@@ -456,12 +485,17 @@ bindsym $mod+Shift+minus move scratchpad
 # Show the first scratchpad window
 bindsym $mod+minus scratchpad show
 
+bindsym Control+Shift+s exec --no-startup-id ~/SudacodeRice/scripts/rofi/rofi-ssh.sh "~/SudacodeRice/rofi/flat-orange-4k.rasi"
+bindsym $mod+Shift+s exec --no-startup-id ~/SudacodeRice/scripts/rofi/rofi-stream.sh
+
+bindsym $mod+Shift+e exec --no-startup-id ~/SudacodeRice/scripts/emc $HOME
+
 for_window [title="System Tray"] floating enable, border none
 for_window [title="System Tray" window_type="normal"] move scratchpad
 bindsym Mod1+t [title="System Tray"] scratchpad show, resize set 250 260, move position center, move up 855px, move right 1740px
 exec_always --no-startup-id "plasmawindowed org.kde.plasma.systemtray"
 
-for_window [class="plasmawindowed" title="TodoList"] resize set 1200 2000, border none, move --no-auto-back-and-forth to workspace "4: "
+# for_window [class="plasmawindowed" title="TodoList"] resize set 1200 2000, border none, move --no-auto-back-and-forth to workspace "4: "
-for_window [class="plasmawindowed" title="Event Calendar"] border none, move --no-auto-back-and-forth to workspace "4: "
+# for_window [class="plasmawindowed" title="Event Calendar"] border none, move --no-auto-back-and-forth to workspace "4: "
 for_window [class="eecs285-proj3-ksyasuda-WheelOfFortune"] floating enable
 for_window [title="Android Emulator - Pixel_3a_API_30_x86:5554"] floating enable, border none

picom/picom.laptop.conf

@@ -0,0 +1,459 @@
+#################################
+#             Shadows           #
+#################################
+
+
+# Enabled client-side shadows on windows. Note desktop windows 
+# (windows with '_NET_WM_WINDOW_TYPE_DESKTOP') never get shadow, 
+# unless explicitly requested using the wintypes option.
+#
+# shadow = false
+shadow = true;
+
+# The blur radius for shadows, in pixels. (defaults to 12)
+# shadow-radius = 12
+shadow-radius = 24;
+
+# The opacity of shadows. (0.0 - 1.0, defaults to 0.75)
+# shadow-opacity = .75
+
+# The left offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-x = -15
+shadow-offset-x = -7;
+
+# The top offset for shadows, in pixels. (defaults to -15)
+# shadow-offset-y = -15
+shadow-offset-y = -7;
+
+# Avoid drawing shadows on dock/panel windows. This option is deprecated,
+# you should use the *wintypes* option in your config file instead.
+#
+# no-dock-shadow = false
+
+# Don't draw shadows on drag-and-drop windows. This option is deprecated, 
+# you should use the *wintypes* option in your config file instead.
+#
+# no-dnd-shadow = false
+
+# Red color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-red = 0
+
+# Green color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-green = 0
+
+# Blue color value of shadow (0.0 - 1.0, defaults to 0).
+# shadow-blue = 0
+
+# Do not paint shadows on shaped windows. Note shaped windows 
+# here means windows setting its shape through X Shape extension. 
+# Those using ARGB background is beyond our control. 
+# Deprecated, use 
+#   shadow-exclude = 'bounding_shaped'
+# or 
+#   shadow-exclude = 'bounding_shaped && !rounded_corners'
+# instead.
+#
+# shadow-ignore-shaped = ''
+
+# Specify a list of conditions of windows that should have no shadow.
+#
+# examples:
+#   shadow-exclude = "n:e:Notification";
+#
+# shadow-exclude = []
+shadow-exclude = [
+  "name = 'Notification'",
+  "class_g = 'Conky'",
+  "class_g ?= 'Notify-osd'",
+  "class_g = 'Cairo-clock'",
+  "_GTK_FRAME_EXTENTS@:c",
+  # "class_g = 'Polybar'"
+];
+
+# Specify a X geometry that describes the region in which shadow should not
+# be painted in, such as a dock window region. Use 
+#    shadow-exclude-reg = "x10+0+0"
+# for example, if the 10 pixels on the bottom of the screen should not have shadows painted on.
+#
+# shadow-exclude-reg = "" 
+
+# Crop shadow of a window fully on a particular Xinerama screen to the screen.
+# xinerama-shadow-crop = false
+
+
+#################################
+#           Fading              #
+#################################
+
+
+# Fade windows in/out when opening/closing and when opacity changes,
+#  unless no-fading-openclose is used.
+# fading = false
+fading = false
+
+# Opacity change between steps while fading in. (0.01 - 1.0, defaults to 0.028)
+# fade-in-step = 0.028
+# fade-in-step = 0.03;
+
+# Opacity change between steps while fading out. (0.01 - 1.0, defaults to 0.03)
+# fade-out-step = 0.03
+# fade-out-step = 0.03;
+
+# The time between steps in fade step, in milliseconds. (> 0, defaults to 10)
+# fade-delta = 10
+
+# Specify a list of conditions of windows that should not be faded.
+# fade-exclude = []
+
+# Do not fade on window open/close.
+# no-fading-openclose = false
+
+# Do not fade destroyed ARGB windows with WM frame. Workaround of bugs in Openbox, Fluxbox, etc.
+# no-fading-destroyed-argb = false
+
+
+#################################
+#   Transparency / Opacity      #
+#################################
+
+
+# Opacity of inactive windows. (0.1 - 1.0, defaults to 1.0)
+active-opacity = 1;
+inactive-opacity = 1
+# inactive-opacity = 0.9;
+# active-opacity = 0.99;
+
+# Opacity of window titlebars and borders. (0.1 - 1.0, disabled by default)
+# frame-opacity = 1.0
+frame-opacity = 0.8;
+
+# Default opacity for dropdown menus and popup menus. (0.0 - 1.0, defaults to 1.0)
+# menu-opacity = 1.0
+
+# Let inactive opacity set by -i override the '_NET_WM_OPACITY' values of windows.
+# inactive-opacity-override = true
+inactive-opacity-override = false;
+
+# Default opacity for active windows. (0.0 - 1.0, defaults to 1.0)
+# active-opacity = 1.0
+
+# Dim inactive windows. (0.0 - 1.0, defaults to 0.0)
+inactive-dim = 0.1
+
+# Specify a list of conditions of windows that should always be considered focused.
+# focus-exclude = []
+focus-exclude = [ "class_g = 'Cairo-clock'" ];
+
+# Use fixed inactive dim value, instead of adjusting according to window opacity.
+# inactive-dim-fixed = 1.0
+
+# Specify a list of opacity rules, in the format `PERCENT:PATTERN`, 
+# like `50:name *= "Firefox"`. picom-trans is recommended over this. 
+# Note we don't make any guarantee about possible conflicts with other 
+# programs that set '_NET_WM_WINDOW_OPACITY' on frame or client windows.
+# example:
+#    opacity-rule = [ "80:class_g = 'URxvt'" ];
+#
+opacity-rule = [
+  "100:_NET_WM_STATE@[0]:32a = '_NET_WM_STATE_FULLSCREEN'",
+  "100:_NET_WM_STATE@[1]:32a = '_NET_WM_STATE_FULLSCREEN'",
+  "100:_NET_WM_STATE@[2]:32a = '_NET_WM_STATE_FULLSCREEN'",
+  "100:_NET_WM_STATE@[3]:32a = '_NET_WM_STATE_FULLSCREEN'",
+  "100:_NET_WM_STATE@[4]:32a = '_NET_WM_STATE_FULLSCREEN'", 
+  "100:name = 'Netflix'",
+  "100:class_g = 'firefox'",
+]
+
+#################################
+#     Background-Blurring       #
+#################################
+
+
+# Parameters for background blurring, see the *BLUR* section for more information.
+# blur-method = 
+blur-size = 10
+#
+# blur-deviation = false
+
+# Blur background of semi-transparent / ARGB windows. 
+# Bad in performance, with driver-dependent behavior. 
+# The name of the switch may change without prior notifications.
+#
+blur-background = false
+
+# Blur background of windows when the window frame is not opaque. 
+# Implies:
+#    blur-background 
+# Bad in performance, with driver-dependent behavior. The name may change.
+#
+# blur-background-frame = false
+
+
+# Use fixed blur strength rather than adjusting according to window opacity.
+blur-background-fixed = false
+
+
+# Specify the blur convolution kernel, with the following format:
+# example:
+#   blur-kern = "5,5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1";
+#
+# blur-kern = ''
+blur-kern = "3x3box";
+
+
+# Exclude conditions for background blur.
+# blur-background-exclude = []
+blur-background-exclude = [
+  "window_type = 'dock'",
+  "window_type = 'desktop'",
+  "_GTK_FRAME_EXTENTS@:c"
+];
+
+#################################
+#       General Settings        #
+#################################
+
+# Daemonize process. Fork to background after initialization. Causes issues with certain (badly-written) drivers.
+# daemon = false
+
+# Specify the backend to use: `xrender`, `glx`, or `xr_glx_hybrid`.
+# `xrender` is the default one.
+#
+# backend = 'glx'
+# backend = "xrender";
+backend = "glx";
+# Enable/disable VSync.
+# vsync = false
+vsync = false
+
+# Enable remote control via D-Bus. See the *D-BUS API* section below for more details.
+# dbus = false
+
+# Try to detect WM windows (a non-override-redirect window with no 
+# child that has 'WM_STATE') and mark them as active.
+#
+# mark-wmwin-focused = false
+mark-wmwin-focused = true;
+
+# Mark override-redirect windows that doesn't have a child window with 'WM_STATE' focused.
+# mark-ovredir-focused = false
+mark-ovredir-focused = true;
+
+# Try to detect windows with rounded corners and don't consider them 
+# shaped windows. The accuracy is not very high, unfortunately.
+#
+detect-rounded-corners = false
+# detect-rounded-corners = true;
+
+# Detect '_NET_WM_OPACITY' on client windows, useful for window managers
+# not passing '_NET_WM_OPACITY' of client windows to frame windows.
+#
+# detect-client-opacity = false
+detect-client-opacity = true;
+
+# Specify refresh rate of the screen. If not specified or 0, picom will 
+# try detecting this with X RandR extension.
+#
+# refresh-rate = 60
+refresh-rate = 0
+
+# Limit picom to repaint at most once every 1 / 'refresh_rate' second to 
+# boost performance. This should not be used with 
+#   vsync drm/opengl/opengl-oml
+# as they essentially does sw-opti's job already, 
+# unless you wish to specify a lower refresh rate than the actual value.
+#
+# sw-opti = 
+
+# Use EWMH '_NET_ACTIVE_WINDOW' to determine currently focused window, 
+# rather than listening to 'FocusIn'/'FocusOut' event. Might have more accuracy, 
+# provided that the WM supports it.
+#
+# use-ewmh-active-win = false
+
+# Unredirect all windows if a full-screen opaque window is detected, 
+# to maximize performance for full-screen windows. Known to cause flickering 
+# when redirecting/unredirecting windows.
+#
+# unredir-if-possible = false
+
+# Delay before unredirecting the window, in milliseconds. Defaults to 0.
+# unredir-if-possible-delay = 0
+
+# Conditions of windows that shouldn't be considered full-screen for unredirecting screen.
+# unredir-if-possible-exclude = []
+
+# Use 'WM_TRANSIENT_FOR' to group windows, and consider windows 
+# in the same group focused at the same time.
+#
+# detect-transient = false
+detect-transient = true
+
+# Use 'WM_CLIENT_LEADER' to group windows, and consider windows in the same 
+# group focused at the same time. 'WM_TRANSIENT_FOR' has higher priority if 
+# detect-transient is enabled, too.
+#
+# detect-client-leader = false
+detect-client-leader = true
+
+# Resize damaged region by a specific number of pixels. 
+# A positive value enlarges it while a negative one shrinks it. 
+# If the value is positive, those additional pixels will not be actually painted 
+# to screen, only used in blur calculation, and such. (Due to technical limitations, 
+# with use-damage, those pixels will still be incorrectly painted to screen.) 
+# Primarily used to fix the line corruption issues of blur, 
+# in which case you should use the blur radius value here 
+# (e.g. with a 3x3 kernel, you should use `--resize-damage 1`, 
+# with a 5x5 one you use `--resize-damage 2`, and so on). 
+# May or may not work with *--glx-no-stencil*. Shrinking doesn't function correctly.
+#
+# resize-damage = 1
+
+# Specify a list of conditions of windows that should be painted with inverted color. 
+# Resource-hogging, and is not well tested.
+#
+# invert-color-include = []
+
+# GLX backend: Avoid using stencil buffer, useful if you don't have a stencil buffer. 
+# Might cause incorrect opacity when rendering transparent content (but never 
+# practically happened) and may not work with blur-background. 
+# My tests show a 15% performance boost. Recommended.
+#
+# glx-no-stencil = false
+
+# GLX backend: Avoid rebinding pixmap on window damage. 
+# Probably could improve performance on rapid window content changes, 
+# but is known to break things on some drivers (LLVMpipe, xf86-video-intel, etc.).
+# Recommended if it works.
+#
+# glx-no-rebind-pixmap = false
+
+# Disable the use of damage information. 
+# This cause the whole screen to be redrawn everytime, instead of the part of the screen
+# has actually changed. Potentially degrades the performance, but might fix some artifacts.
+# The opposing option is use-damage
+#
+# no-use-damage = false
+use-damage = true
+
+# Use X Sync fence to sync clients' draw calls, to make sure all draw 
+# calls are finished before picom starts drawing. Needed on nvidia-drivers 
+# with GLX backend for some users.
+#
+# xrender-sync-fence = false
+
+# GLX backend: Use specified GLSL fragment shader for rendering window contents. 
+# See `compton-default-fshader-win.glsl` and `compton-fake-transparency-fshader-win.glsl` 
+# in the source tree for examples.
+#
+# glx-fshader-win = ''
+
+# Force all windows to be painted with blending. Useful if you 
+# have a glx-fshader-win that could turn opaque pixels transparent.
+#
+# force-win-blend = false
+
+# Do not use EWMH to detect fullscreen windows. 
+# Reverts to checking if a window is fullscreen based only on its size and coordinates.
+#
+# no-ewmh-fullscreen = false
+
+# Dimming bright windows so their brightness doesn't exceed this set value. 
+# Brightness of a window is estimated by averaging all pixels in the window, 
+# so this could comes with a performance hit. 
+# Setting this to 1.0 disables this behaviour. Requires --use-damage to be disabled. (default: 1.0)
+#
+# max-brightness = 1.0
+
+# Make transparent windows clip other windows like non-transparent windows do,
+# instead of blending on top of them.
+#
+# transparent-clipping = false
+
+# Set the log level. Possible values are:
+#  "trace", "debug", "info", "warn", "error"
+# in increasing level of importance. Case doesn't matter. 
+# If using the "TRACE" log level, it's better to log into a file 
+# using *--log-file*, since it can generate a huge stream of logs.
+#
+# log-level = "debug"
+log-level = "warn";
+
+# Set the log file.
+# If *--log-file* is never specified, logs will be written to stderr. 
+# Otherwise, logs will to written to the given file, though some of the early 
+# logs might still be written to the stderr. 
+# When setting this option from the config file, it is recommended to use an absolute path.
+#
+# log-file = '/path/to/your/log/file'
+
+# Show all X errors (for debugging)
+# show-all-xerrors = false
+
+# Write process ID to a file.
+# write-pid-path = '/path/to/your/log/file'
+
+# Window type settings
+# 
+# 'WINDOW_TYPE' is one of the 15 window types defined in EWMH standard: 
+#     "unknown", "desktop", "dock", "toolbar", "menu", "utility", 
+#     "splash", "dialog", "normal", "dropdown_menu", "popup_menu", 
+#     "tooltip", "notification", "combo", and "dnd".
+# 
+# Following per window-type options are available: ::
+# 
+#   fade, shadow:::
+#     Controls window-type-specific shadow and fade settings.
+# 
+#   opacity:::
+#     Controls default opacity of the window type.
+# 
+#   focus:::
+#     Controls whether the window of this type is to be always considered focused. 
+#     (By default, all window types except "normal" and "dialog" has this on.)
+# 
+#   full-shadow:::
+#     Controls whether shadow is drawn under the parts of the window that you 
+#     normally won't be able to see. Useful when the window has parts of it 
+#     transparent, and you want shadows in those areas.
+# 
+#   redir-ignore:::
+#     Controls whether this type of windows should cause screen to become 
+#     redirected again after been unredirected. If you have unredir-if-possible
+#     set, and doesn't want certain window to cause unnecessary screen redirection, 
+#     you can set this to `true`.
+#
+
+unredir-if-possible = false;
+
+
+wintypes:
+{
+  tooltip = { fade = true; shadow = true; opacity = 0.75; focus = true; full-shadow = false; };
+  dock = { shadow = false; }
+  dnd = { shadow = false; }
+  # popup_menu = { opacity = 0.85; }
+  # dropdown_menu = { opacity = 0.85; }
+};
+
+# ------------
+# ibhagwan
+# corner-radius = 12;
+# corner-radius = 15;
+corner-radius = 25;
+rounded-corners-exclude = [
+  "class_g = 'Plasma'",
+  "class_g = 'plsama-desktop'",
+  "class_g = 'win7'",
+  "class_g = 'krunner'",
+  # "class_g = 'Polybar'"
+];
+
+# blur: {
+#   # method = "dual_kawase";
+#   method = "kawase";
+#   strength = 7;
+#   background = false;
+#   background-frame = false;
+#   background-fixed = false;
+# };

polybar-modules/bluetooth.desktop.ini

@@ -5,5 +5,6 @@ interval = 2
 click-left = ~/SudacodeRice/scripts/rofi-bluetooth.desktop
 click-right = blueman-manager
 # format-foreground = #fc8353
+format-background = ${color.shade4}
 format-foreground = #A8D385
 format-padding = 1

polybar-modules/bluetooth2.ini

@@ -5,5 +5,6 @@ interval = 2
 click-left = ~/SudacodeRice/scripts/rofi-bluetooth
 click-right = blueman-manager
 # format-foreground = #fc8353
+format-background = ${color.shade4}
 format-foreground = #98be65
 format-padding = 1 

polybar-modules/jdate.ini

@@ -4,6 +4,7 @@ type = custom/script
 interval = 100
 label-font = 4
 # format-foreground = #fc8353 
+format-background = ${color.shade4}
 format-foreground = #c678dd
 format-padding = 1
 exec = python ~/SudacodeRice/scripts/date.py

polybar-modules/network-desktop.ini

@@ -16,6 +16,8 @@ label-disconnected = 睊 not connected
 #label-disconnected-foreground = #66ffffff
 # label-connected-padding = 2
 format-connected-padding = 1
+label-connected-background = ${color.shade4}
+label-disconnected-background = ${color.shade4}
 label-connected-foreground = #A8D385
 label-disconnected-foreground = #F85522
 # label-disconnected-padding = 2

polybar-modules/network.ini

@@ -15,6 +15,8 @@ label-connected =   %essid%
 label-disconnected = 睊 not connected
 # label-connected-padding = 2
 format-connected-padding = 1
+label-connected-background = ${color.shade4}
+label-disconnected-background = ${color.shade4}
 label-connected-foreground = #A8D385
 label-disconnected-foreground = #F85522
 # label-disconnected-padding = 2

polybar-modules/openweathermap-fullfeatured.ini

@@ -4,6 +4,6 @@ exec = ~/SudacodeRice/scripts/openweathermap-fullfeatured.sh
 click-left = exec ~/scripts/weather
 interval = 600
 format-font = 3
-format-background = #282c34 
+format-background = ${color.shade4} 
 format-foreground = #fc8353 
 format-padding = 1

polybar-modules/package-updates.ini

@@ -2,6 +2,7 @@
 type = custom/ipc
 hook-0 = ~/SudacodeRice/scripts/package-updates
 # format-foreground = #56a7b5
+format-background = ${color.shade4}
 format-foreground = #98be65
 format-padding = 1
 interval = 500

polybar/config.desktop.ini

@@ -13,7 +13,7 @@ coccupied = #42A5F5
 shade1 = #17191e 
 shade2 = #1e2127
 shade3 = #191c21 
-shade4 = #282c34 
+shade4 = #21242b
 shade5 = #AA2E50
 shade6 = #7E57C2
 shade7 = #9575CD

polybar/config.ini

@@ -7,13 +7,13 @@ fg = #FFFFFF
 fg-alt = #454545
 
 acolor = #FFFFFF
-curgent = #EF5350
+urgent = #EF5350
 coccupied = #42A5F5
 
 shade1 = #17191e
 shade2 = #1e2127
 shade3 = #222834 
-shade4 = #282c34 
+shade4 = #21242b
 shade5 = #AA2E50
 shade6 = #7E57C2
 shade7 = #9575CD
@@ -46,17 +46,21 @@ black = #000000
 ;==========================================================
 
 [bar/main]
-width = 100%
+; width = 100%
+width = 95%
 height = 65
-# offset-x = 2.5%
+offset-x = 2.5%
 # offset-y = 2%
 bottom = false
-fixed-center = false
+fixed-center = true
 line-size = 2
 radius = 0
+override-redirect = true
+wm-restack = i3
 
 #background = ${color.bg}
-background = #282c34
+; background = #282c34
+background = ${color.shade4}
 foreground = ${color.fg}
 
 ;==========================================================