Deprecate x11 window capture since wayland is standard almost everywhere now and I have no way to test it

README.md

@@ -13,8 +13,8 @@ Basic usage is comparable to Manga OCR as in, `owocr` keeps scanning for images
 Additionally:
 - Scanning the clipboard takes basically zero system resources on macOS and Windows
 - Supports reading images and/or writing text to a websocket with the `-r=websocket` and/or `-w=websocket` parameters (the port is 7331 by default, and is configurable in the config file)
-- Supports reading images from a Unix domain socket (`/tmp/owocr.sock`) on macOS and Linux with `-r=unixsocket`
+- On macOS and Linux, supports reading images from a Unix domain socket (`/tmp/owocr.sock`) with `-r=unixsocket`
-- Supports capturing from the screen directly or from a specific window with `-r=screencapture`. By default it will open a coordinate picker so you can select an area of the screen and then read from it every 3 seconds, but you can change it to screenshot the whole screen, a manual set of coordinates `x,y,width,height` or just a specific window (with the window title). You can also change the delay between screenshots or specify a keyboard combo if you don't want screenshots to be taken periodically. Refer to the config file or to `owocr --help` for more details about the screen capture settings
+- On Windows and macOS, supports capturing from the screen directly or from a specific window with `-r=screencapture`. By default it will open a coordinate picker so you can select an area of the screen and then read from it every 3 seconds, but you can change it to screenshot the whole screen, a manual set of coordinates `x,y,width,height` or just a specific window (with the window title). You can also change the delay between screenshots or specify a keyboard combo if you don't want screenshots to be taken periodically. Refer to the config file or to `owocr --help` for more details about the screen capture settings
 - You can pause/unpause the image processing by pressing "p" or terminate the script with "t" or "q" inside the terminal window
 - You can switch between OCR providers pressing their corresponding keyboard key inside the terminal window (refer to the list of keys in the providers list below)
 - You can start the script paused with the `-p` option or with a specific provider with the `-e` option (refer to `owocr -h` for the list)

owocr/run.py

@@ -50,11 +50,6 @@ try:
 except ImportError:
     pass
 
-try:
-    import pywinctl
-except ImportError:
-    pass
-
 
 config = None
 
@@ -512,18 +507,6 @@ def on_window_minimized(minimized):
     screencapture_window_visible = not minimized
 
 
-def on_window_resized(size):
-    global sct_params
-    sct_params['width'] = size[0]
-    sct_params['height'] = size[1]
-
-
-def on_window_moved(pos):
-    global sct_params
-    sct_params['left'] = pos[0]
-    sct_params['top'] = pos[1]
-
-
 def normalize_macos_clipboard(img):
     ns_data = NSData.dataWithBytes_length_(img, len(img))
     ns_image = NSImage.alloc().initWithData_(ns_data)
@@ -647,14 +630,6 @@ def run(read_from=None,
     :param screen_capture_combo: When reading with screen capture, specifies a combo to wait on for taking a screenshot instead of using the delay. As an example: "<ctrl>+<shift>+s". The list of keys can be found here: https://pynput.readthedocs.io/en/latest/keyboard.html#pynput.keyboard.Key
     """
 
-    if read_from == 'screencapture' and sys.platform not in ('darwin', 'win32'):
-        window_capture_available = False
-        try:
-            active_window_name = pywinctl.getActiveWindowTitle()
-            window_capture_available = True
-        except Exception:
-            pass
-
     logger.configure(handlers=[{'sink': sys.stderr, 'format': config.get_general('logger_format')}])
 
     if config.has_config:
@@ -878,38 +853,7 @@ def run(read_from=None,
                 windows_window_tracker.start()
                 logger.opt(ansi=True).info(f'Selected window: {window_title}')
             else:
-                if not window_capture_available:
+                raise ValueError('Window capture is only currently supported on Windows and macOS')
-                    raise ValueError('Window capture is not available on your setup')
-
-                sct = mss.mss()
-                window_title = None
-                window_titles = pywinctl.getAllTitles()
-                if screen_capture_area in window_titles:
-                    window_title = screen_capture_area
-                else:
-                    for t in window_titles:
-                        if screen_capture_area in t and t != active_window_name:
-                            window_title = t
-                            break
-
-                if not window_title:
-                    raise ValueError(area_invalid_error)
-
-                target_window = pywinctl.getWindowsWithTitle(window_title)[0]
-                coord_top = target_window.top
-                coord_left = target_window.left
-                coord_width = target_window.width
-                coord_height = target_window.height
-
-                if screen_capture_only_active_windows:
-                    screencapture_window_active = target_window.isActive
-                    target_window.watchdog.start(isAliveCB=on_window_closed, isActiveCB=on_window_activated, resizedCB=on_window_resized, movedCB=on_window_moved)
-                else:
-                    screencapture_window_visible = not target_window.isMinimized
-                    target_window.watchdog.start(isAliveCB=on_window_closed, isMinimizedCB=on_window_minimized, resizedCB=on_window_resized, movedCB=on_window_moved)
-
-                sct_params = {'top': coord_top, 'left': coord_left, 'width': coord_width, 'height': coord_height}
-                logger.opt(ansi=True).info(f'Selected window: {window_title}')
 
         filtering = TextFiltering()
         read_from_readable = 'screen capture'
@@ -1027,7 +971,8 @@ def run(read_from=None,
                 take_screenshot = screencapture_window_active and not paused
 
             if take_screenshot and screencapture_window_visible:
-                if screencapture_mode == 2 and sys.platform == 'darwin':
+                if screencapture_mode == 2:
+                    if sys.platform == 'darwin':
                         with objc.autorelease_pool():
                             if old_macos_screenshot_api:
                                 cg_image = CGWindowListCreateImageFromArray(CGRectNull, [window_id], kCGWindowImageBoundsIgnoreFraming)
@@ -1045,7 +990,7 @@ def run(read_from=None,
                             raw_data = CGDataProviderCopyData(CGImageGetDataProvider(cg_image))
                             bpr = CGImageGetBytesPerRow(cg_image)
                         img = Image.frombuffer('RGBA', (width, height), raw_data, 'raw', 'BGRA', bpr, 1)
-                elif screencapture_mode == 2 and sys.platform == 'win32':
+                    else:
                         try:
                             coord_left, coord_top, right, bottom = win32gui.GetWindowRect(window_handle)
                             coord_width = right - coord_left
@@ -1116,11 +1061,9 @@ def run(read_from=None,
             if screen_capture_only_active_windows:
                 macos_window_tracker.stop = True
                 macos_window_tracker.join()
-        elif sys.platform == 'win32':
+        else:
             windows_window_tracker.stop = True
             windows_window_tracker.join()
-        else:
-            target_window.watchdog.stop()
     elif read_from == 'unixsocket':
         unix_socket_server.shutdown()
         unix_socket_server_thread.join()

owocr_config.ini

@@ -22,7 +22,7 @@
 ;screen_capture_area = screen_1
 ;screen_capture_area = 400,200,1500,600
 ;screen_capture_area = OBS
-;note: if screen_capture_area is a window name, this can be changed to capture inactive windows too. On Linux, the window must then not be covered by other windows!
+;note: if screen_capture_area is a window name, this can be changed to capture inactive windows too.
 ;screen_capture_only_active_windows = True
 ;screen_capture_delay_secs = 3
 ;note: this specifies a combo to wait on for taking a screenshot instead of using the delay. As an example: <ctrl>+<shift>+s. The list of keys can be found here: https://pynput.readthedocs.io/en/latest/keyboard.html#pynput.keyboard.Key

pyproject.toml

@@ -30,7 +30,6 @@ dependencies = [
     "langid",
     "psutil",
     "requests",
-    "pywinctl;platform_system=='Linux'",
     "pywin32;platform_system=='Windows'",
     "pyobjc;platform_system=='Darwin'"
 ]