update

input.conf

@@ -193,7 +193,8 @@ CTRL+1 no-osd change-list glsl-shaders set "~/.config/mpv/shaders/FSR.glsl"; sho
 CTRL+2 no-osd change-list glsl-shaders set "~/.config/mpv/shaders/NVScaler.glsl"; show-text "NIS"
 CTRL+3 no-osd change-list glsl-shaders set "~/.config/mpv/shaders/CAS-scaled.glsl"; show-text "CAS"
 CTRL+4 no-osd change-list glsl-shaders set "~/.config/mpv/shaders/FSRCNNX.glsl"; show-text "FSRCNNX"
-CTRL+5 no-osd change-list glsl-shaders set "~/.config/mpv/shaders/FSRCNNX.glsl:~/.config/mpv/shaders/CAS-scaled.glsl:~/.config/mpv/shaders/NVScaler.glsl"; show-text "ALL"
+CTRL+5 no-osd change-list glsl-shaders set "~/.config/mpv/shaders/ArtCNN_C4F32.glsl"; show-text "ArtCNN"
+CTRL+6 no-osd change-list glsl-shaders set "~/.config/mpv/shaders/ArtCNN_C4F32.glsl:~/.config/mpv/shaders/FSRCNNX.glsl:~/.config/mpv/shaders/CAS-scaled.glsl:~/.config/mpv/shaders/NVScaler.glsl"; show-text "ALL"
 
 CTRL+0 no-osd change-list glsl-shaders clr ""; show-text "GLSL shaders cleared"
 

mpv.conf

@@ -1,162 +1,20 @@
-#
-# Example mpv configuration file
-#
-# Warning:
-#
-# The commented example options usually do _not_ set the default values. Call
-# mpv with --list-options to see the default values for most options. There is
-# no builtin or example mpv.conf with all the defaults.
-#
-#
-# Configuration files are read system-wide from /usr/local/etc/mpv.conf
-# and per-user from ~~/mpv.conf, where per-user settings override
-# system-wide settings, all of which are overridden by the command line.
-#
-# Configuration file settings and the command line options use the same
-# underlying mechanisms. Most options can be put into the configuration file
-# by dropping the preceding '--'. See the man page for a complete list of
-# options.
-#
-# Lines starting with '#' are comments and are ignored.
-#
-# See the CONFIGURATION FILES section in the man page
-# for a detailed description of the syntax.
-#
-# Profiles should be placed at the bottom of the configuration file to ensure
-# that settings wanted as defaults are not restricted to specific profiles.
-
-##################
-# video settings #
-##################
-
-# Start in fullscreen mode by default.
-#fs=yes
-
-# force starting with centered window
-# geometry=50%:50%
-
-# don't allow a new window to have a size larger than 90% of the screen size
-#autofit-larger=90%x90%
-
-# Do not close the window on exit.
-#keep-open=yes
-
-# Do not wait with showing the video window until it has loaded. (This will
-# resize the window once video is loaded. Also always shows a window with
-# audio.)
-#force-window=immediate
-
-# Disable the On Screen Controller (OSC).
-# osc=no
-
-# Keep the player window on top of all other windows.
-#ontop=yes
-# window=scale=1.0
-
-# Specify high quality video rendering preset (for --vo=gpu only)
-# Can cause performance problems with some drivers and GPUs.
-# profile=gpu-hq
-
-# Force video to lock on the display's refresh rate, and change video and audio
-# speed to some degree to ensure synchronous playback - can cause problems
-# with some drivers and desktop environments.
-#video-sync=display-resample
-
-# Enable hardware decoding if available. Often, this does not work with all
-# video outputs, but should work well with default settings on most systems.
-# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
-# may or may not help.
-# discourged by mpv devs and not likely to make significant difference
-# hwdec=auto-copy
-# hwdec-codecs=all
-
-##################
-# audio settings #
-##################
-
-# Specify default audio device. You can list devices with: --audio-device=help
-# The option takes the device string (the stuff between the '...').
-#audio-device=alsa/default
-
-# Do not filter audio to keep pitch when changing playback speed.
-#audio-pitch-correction=no
-
-# Output 5.1 audio natively, and upmix/downmix audio with a different format.
-#audio-channels=5.1
-# Disable any automatic remix, _if_ the audio output accepts the audio format.
-# of the currently played file. See caveats mentioned in the manpage.
-# (The default is "auto-safe", see manpage.)
-#audio-channels=auto
-
-##################
-# other settings #
-##################
-
-# Pretend to be a web browser. Might fix playback with some streaming sites,
-# but also will break with shoutcast streams.
-# user-agent="Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/115.0.0.0 Safari/537.36"
 user-agent="Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/115.0.0.0 Safari/537.36"
-# user-agent="Mozilla/5.0 (Windows NT 10.0; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/45.0.2454.85 Safari/537.36"
-# user-agent="Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Ubuntu Chromium/37.0.2062.94 Chrome/37.0.2062.94 Safari/537.36"
-# user-agent="Chromium/37.0.2062.94 Chrome/37.0.2062.94 Safari/537.36"
-
-# cache settings
-#
-# Use a large seekable RAM cache even for local input.
 cache=yes
-#
-# Use extra large RAM cache (needs cache=yes to make it useful).
 demuxer-max-bytes=500M
 demuxer-max-back-bytes=100M
-#
-# Disable the behavior that the player will pause if the cache goes below a
-# certain fill size.
 cache-pause=no
-#
+ontop=yes
-# Store cache payload on the hard disk instead of in RAM. (This may negatively
-# impact performance unless used for slow input such as network.)
-#cache-dir=~/.cache/
-#cache-on-disk=yes
-
-# Display English subtitles if available.
-#slang=en
-
-# Play Finnish audio if available, fall back to English otherwise.
-#alang=fi,en
-
-# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
-# If the file seems to be valid UTF-8, prefer UTF-8.
-# (You can add '+' in front of the codepage to force it.)
-#sub-codepage=cp1256
-
-# You can also include other configuration files.
-#include=/path/to/the/file/you/want/to/include
-
-############
-# Profiles #
-############
-
-# The options declared as part of profiles override global default settings,
-# but only take effect when the profile is active.
-
-# The following profile can be enabled on the command line with: --profile=eye-cancer
-
-#[eye-cancer]
-#sharpen=5
-
 sub-font="JetBrainsMono Nerd Font"
 sub-font-size=45
 # osd-font="Fluent System Icons"
 border=no
-
+# geometry=50%
-geometry=50%
+autofit=50%
-
+volume=75
-volume=50
-# speed-step=0.05
 audio-spdif=ac3,eac3,dts-hd,truehd
 # glsl-shaders="~~/shaders/Anime4K_Clamp_Highlights.glsl:~~/shaders/Anime4K_Restore_CNN_VL.glsl:~~/shaders/Anime4K_Upscale_CNN_x2_VL.glsl:~~/shaders/Anime4K_AutoDownscalePre_x2.glsl:~~/shaders/Anime4K_AutoDownscalePre_x4.glsl:~~/shaders/Anime4K_Upscale_CNN_x2_M.glsl"
-glsl-shaders="~~/shaders/FSRCNNX.glsl:~~/shaders/FSR.glsl:~~/shaders/NVScaler.glsl:~~/shaders/CAS-scaled.glsl"
+# glsl-shaders="~~/shaders/FSRCNNX.glsl:~~/shaders/FSR.glsl:~~/shaders/NVScaler.glsl:~~/shaders/CAS-scaled.glsl"
-# glsl-shaders="~~/shaders/FSR.glsl"
+glsl-shaders="~~/shaders/ArtCNN_C4F32.glsl:~~/shaders/FSRCNNX.glsl:~~/shaders/CAS-scaled.glsl"
 
 # Can fix stuttering in some cases, in other cases probably causes it. Try it if you experience stuttering.
 opengl-early-flush=no
@@ -172,28 +30,13 @@ ytdl-format=bestvideo+bestaudio/best
 sub-auto=fuzzy
 slang=en,eng
 
-# CATPPUCCIN MACHIATTO
-# Main mpv options
-background-color='#24273a'
-osd-back-color='#181926'
-osd-border-color='#181926'
-osd-color='#cad3f5'
-osd-shadow-color='#24273a'
-
-# Stats script options
-# Options are on separate lines for clarity
-# Colors are in #BBGGRR format
-script-opts-append=stats-border_color=30201e
-script-opts-append=stats-font_color=f5d3ca
-script-opts-append=stats-plot_bg_border_color=f8bdb7
-script-opts-append=stats-plot_bg_color=30201e
-script-opts-append=stats-plot_color=f8bdb7
-
 # profile=svp
 profile=gpu-hq
+blend-subtitles=video
 # GPU OPTIONS
 vo=gpu-next
 hwdec=nvdec-copy
+gpu-api=vulkan
 scale=bicubic
 dscale=bicubic
 cscale=bicubic
@@ -212,6 +55,19 @@ input-ipc-server=/tmp/mpvsocket
 # ao=pule,pipewire
 ao=pipewire,pulse
 
+deband=no
+deband-iterations=2
+deband-threshold=64
+deband-range=20
+deband-grain=64
+
+subs-with-matching-audio=no
+sub-fix-timing=yes
+sub-ass-override=scale
+#Some settings fixing VOB/PGS subtitles (creating blur & changing yellow subs to gray)
+sub-gauss=1.0
+sub-gray=yes
+
 [hdr]
 target-colorspace-hint=yes
 gpu-api=vulkan
@@ -241,3 +97,4 @@ sub-auto=fuzzy
 slang=ja,jpn
 alang=ja,jpn
 vlang=ja,jpn
+sub-font="Noto Sans CJK JP"