mpv/mpv.conf

#
# Example mpv configuration file
#
# Warning:
#
# The commented example options usually do _not_ set the default values. Call
# mpv with --list-options to see the default values for most options. There is
# no builtin or example mpv.conf with all the defaults.
#
#
# Configuration files are read system-wide from /usr/local/etc/mpv.conf
# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
# system-wide settings, all of which are overridden by the command line.
#
# Configuration file settings and the command line options use the same
# underlying mechanisms. Most options can be put into the configuration file
# by dropping the preceding '--'. See the man page for a complete list of
# options.
#
# Lines starting with '#' are comments and are ignored.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
#
# Profiles should be placed at the bottom of the configuration file to ensure
# that settings wanted as defaults are not restricted to specific profiles.

##################
# video settings #
##################

# Start in fullscreen mode by default.
#fs=yes

# force starting with centered window
# geometry=50%:50%

# don't allow a new window to have a size larger than 90% of the screen size
#autofit-larger=90%x90%

# Do not close the window on exit.
#keep-open=yes

# Do not wait with showing the video window until it has loaded. (This will
# resize the window once video is loaded. Also always shows a window with
# audio.)
#force-window=immediate

# Disable the On Screen Controller (OSC).
# osc=no

# Keep the player window on top of all other windows.
#ontop=yes
# window=scale=1.0

# Specify high quality video rendering preset (for --vo=gpu only)
# Can cause performance problems with some drivers and GPUs.
# profile=gpu-hq
profile=svp

# Force video to lock on the display's refresh rate, and change video and audio
# speed to some degree to ensure synchronous playback - can cause problems
# with some drivers and desktop environments.
#video-sync=display-resample

# Enable hardware decoding if available. Often, this does not work with all
# video outputs, but should work well with default settings on most systems.
# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
# may or may not help.
# discourged by mpv devs and not likely to make significant difference
# hwdec=auto-copy
# hwdec-codecs=all

##################
# audio settings #
##################

# Specify default audio device. You can list devices with: --audio-device=help
# The option takes the device string (the stuff between the '...').
#audio-device=alsa/default

# Do not filter audio to keep pitch when changing playback speed.
#audio-pitch-correction=no

# Output 5.1 audio natively, and upmix/downmix audio with a different format.
#audio-channels=5.1
# Disable any automatic remix, _if_ the audio output accepts the audio format.
# of the currently played file. See caveats mentioned in the manpage.
# (The default is "auto-safe", see manpage.)
#audio-channels=auto

##################
# other settings #
##################

# Pretend to be a web browser. Might fix playback with some streaming sites,
# but also will break with shoutcast streams.
# user-agent="Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Firefox/60.0"
# user-agent="Mozilla/5.0 (Windows NT 10.0; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/45.0.2454.85 Safari/537.36"
user-agent="Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Ubuntu Chromium/37.0.2062.94 Chrome/37.0.2062.94 Safari/537.36"

# cache settings
#
# Use a large seekable RAM cache even for local input.
cache=yes
#
# Use extra large RAM cache (needs cache=yes to make it useful).
#demuxer-max-bytes=500M
#demuxer-max-back-bytes=100M
#
# Disable the behavior that the player will pause if the cache goes below a
# certain fill size.
#cache-pause=no
#
# Store cache payload on the hard disk instead of in RAM. (This may negatively
# impact performance unless used for slow input such as network.)
#cache-dir=~/.cache/
#cache-on-disk=yes

# Display English subtitles if available.
#slang=en

# Play Finnish audio if available, fall back to English otherwise.
#alang=fi,en

# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
# If the file seems to be valid UTF-8, prefer UTF-8.
# (You can add '+' in front of the codepage to force it.)
#sub-codepage=cp1256

# You can also include other configuration files.
#include=/path/to/the/file/you/want/to/include

############
# Profiles #
############

# The options declared as part of profiles override global default settings,
# but only take effect when the profile is active.

# The following profile can be enabled on the command line with: --profile=eye-cancer

#[eye-cancer]
#sharpen=5

sub-font=JetBrainsMono Nerd Font
sub-font-size=50
osd-font=JetBrainsMono Nerd Font
ytdl-format=bestvideo+bestaudio/best

geometry=50%

volume=50
# speed-step=0.05
audio-spdif=ac3,eac3,dts-hd,truehd
glsl-shaders="~~/shaders/Anime4K_Clamp_Highlights.glsl:~~/shaders/Anime4K_Restore_CNN_VL.glsl:~~/shaders/Anime4K_Upscale_CNN_x2_VL.glsl:~~/shaders/Anime4K_AutoDownscalePre_x2.glsl:~~/shaders/Anime4K_AutoDownscalePre_x4.glsl:~~/shaders/Anime4K_Upscale_CNN_x2_M.glsl"

# Can fix stuttering in some cases, in other cases probably causes it. Try it if you experience stuttering.
opengl-early-flush=no

osc=no

keep-open
# get subtitles for videos automatically
# sub-auto=fuzzy
ytdl-raw-options=ignore-config=,sub-lang=en,write-auto-sub=
slang=en
# disable subtitles by default
sid=no

[svp]
input-ipc-server=/tmp/mpvsocket     # Receives input from SVP
hr-seek-framedrop=no                # Fixes audio desync
resume-playback=no                  # Not compatible with SVP

[Idle]
profile-cond=p["idle-active"]
profile-restore=copy-equal
title=' '
keepaspect=no
background=1