fix(mining): ignore stale captions and improve waveform contrast

- Use active parsed cue text and timings for overlay mining - Normalize waveform levels against the clip's noise floor
2026-09-11 05:16:27 -07:00 · 2026-09-02 18:22:03 -07:00
parent f90ee78204
commit c85db5e07e
8 changed files with 145 additions and 36 deletions
@@ -183,7 +183,7 @@ Output format: MP3 at 44100 Hz. If the video has multiple audio streams, SubMine

 The audio is uploaded to Anki's media folder and inserted as `[sound:audio_<timestamp>.mp3]`.

-Set `media.reviewTiming` to `true` to pause playback and review each word, sentence, or audio card before its media is generated. The review opens with the subtitle range plus configured audio padding. Drag either edge of the clip to trim it, drag the middle to slide it without changing its length, or press anywhere else on the waveform to snap the nearer edge there. A focused edge also moves with the arrow keys, by 100 ms alone or 500 ms with Shift, and the 100 ms buttons do the same. Space previews the selection with a playhead that sweeps the clip, Enter confirms, and Escape cancels. The Earlier and Later buttons reveal another two seconds of available timeline without moving the selected clip. A speech-weighted waveform shows the mined subtitle as a tinted band with labeled line-start and line-end rails, making adjacent dialogue easier to distinguish. SubMiner uses a center channel when one carries dialogue, then falls back to a speech-band mono mix. Waveform analysis failure leaves the timing controls available. The confirmed range is exact: SubMiner does not apply audio padding a second time. Static screenshots use its midpoint, and animated AVIF clips use the full confirmed range.
+Set `media.reviewTiming` to `true` to pause playback and review each word, sentence, or audio card before its media is generated. The review opens with the subtitle range plus configured audio padding. Drag either edge of the clip to trim it, drag the middle to slide it without changing its length, or press anywhere else on the waveform to snap the nearer edge there. A focused edge also moves with the arrow keys, by 100 ms alone or 500 ms with Shift, and the 100 ms buttons do the same. Space previews the selection with a playhead that sweeps the clip, Enter confirms, and Escape cancels. The Earlier and Later buttons reveal another two seconds of available timeline without moving the selected clip. A speech-weighted waveform shows the mined subtitle as a tinted band with labeled line-start and line-end rails, making adjacent dialogue easier to distinguish. SubMiner uses a center channel when one carries dialogue, then falls back to a mono mix, keeps only the 250 to 3500 Hz speech band, and draws each slice's loudness relative to the clip's own noise floor, so steady background music or ambience reads as a flat line while dialogue stands out. Waveform analysis failure leaves the timing controls available. The confirmed range is exact: SubMiner does not apply audio padding a second time. Static screenshots use its midpoint, and animated AVIF clips use the full confirmed range.

 The review can also pull adjacent subtitle lines onto the card. Press `P` or `N` (or use the Prev and Next steppers above the sentence preview) to add the previous or next line, as many times as lines are available; Shift+`P` and Shift+`N` remove them again. The sentence preview lists every included line with the mined line highlighted, so the card's sentence field is always visible before you confirm, and the clip start or end, along with the line-start and line-end rails on the waveform, follows the outermost added line, keeping the review's audio padding. Confirming writes the combined lines to the sentence field; the Reset button drops the added lines along with any timing changes. Adjacent lines come from the parsed subtitle track when one is loaded; otherwise only lines that already played are offered, and a clip capped by `media.maxMediaDuration` keeps the full combined sentence even when the audio cannot cover every added line.